Datsun Dreaming
New belts in the 350. New clutch slave too. Bleeding these things is a BITCH! I'm going to hack up my universal adapter for the Motive bleeder and try again. Altima got a tranny flush and a clean bill of health from Autoway.
I've got some spare 25 and 30A square Nissan fuses if you guys need some. Relays, too.
I've got some spare 25 and 30A square Nissan fuses if you guys need some. Relays, too.
__________________
Took the front bumper off so I can maybe possibly get onto a tow dolly to drive Desoto this sunday. It looks like dog shit.
New belts in the 350. New clutch slave too. Bleeding these things is a BITCH! I'm going to hack up my universal adapter for the Motive bleeder and try again. Altima got a tranny flush and a clean bill of health from Autoway.
I've got some spare 25 and 30A square Nissan fuses if you guys need some. Relays, too.
I've got some spare 25 and 30A square Nissan fuses if you guys need some. Relays, too.
__________________
Nissan North America - Canton

Nissan North America - Canton

Ep, my buddy has some left over Z mods from when he sold his if you ar einterested in an exhaust or Racing Harts CX's 19"??
__________________
Looking to buy or sell Real Estate, give me a call.
http://liberty-vip.com Flush ≠ VIP. Spread the word in 2012
Looking to buy or sell Real Estate, give me a call.
http://liberty-vip.com Flush ≠ VIP. Spread the word in 2012
I'm only looking for one exhaust: Nismo S-tune. Lemme know what he's got though. I'm picky and weird, by the way.
Oh yeah, Dear Mr 03-06 350Z clutch slave designer: FU. It took for damn ever bleed that thing and I figured out why. I took the old one apart and found that in the orientation that it's strapped to the trans, the bleed hole doesn't go all the way to the top. So, if there's an air bubble in your slave, it'll be at the top above the bleed hole. After seeing this, I unbolted the slave from the trans and held it so that the bleeder was at the top. A shitton of bubbles shot out and everything was cool within 3 pumps. There goes all my ATE type 200.
Oh yeah, Dear Mr 03-06 350Z clutch slave designer: FU. It took for damn ever bleed that thing and I figured out why. I took the old one apart and found that in the orientation that it's strapped to the trans, the bleed hole doesn't go all the way to the top. So, if there's an air bubble in your slave, it'll be at the top above the bleed hole. After seeing this, I unbolted the slave from the trans and held it so that the bleeder was at the top. A shitton of bubbles shot out and everything was cool within 3 pumps. There goes all my ATE type 200.
__________________
I will check again what exhasut it is. I think he still has a front or rear bumper too. and I KNOW you are picky and weird...
__________________
Looking to buy or sell Real Estate, give me a call.
http://liberty-vip.com Flush ≠ VIP. Spread the word in 2012
Looking to buy or sell Real Estate, give me a call.
http://liberty-vip.com Flush ≠ VIP. Spread the word in 2012
Got told all suspension arms are the same and insulted because I changed my mind on buying some unknown brand suspension arms("k sport isis and godspeed I think"). When I decide its time for full adjustables, I get a good name brand.
[ATTACH=CONFIG]148340[/ATTACH]
Looks like ebay junk to me.
[ATTACH=CONFIG]148340[/ATTACH]
Looks like ebay junk to me.
Ep -the exhaust is HKS Hi power Titanium. And He sold the rest other than the racing harts.
Brian, I do still. Trying to get new rubber for them so I Can get it all done at once. Thanks
Brian, I do still. Trying to get new rubber for them so I Can get it all done at once. Thanks
__________________
Looking to buy or sell Real Estate, give me a call.
http://liberty-vip.com Flush ≠ VIP. Spread the word in 2012
Looking to buy or sell Real Estate, give me a call.
http://liberty-vip.com Flush ≠ VIP. Spread the word in 2012


