Here's your


and some help finding a job
Find Jobs - Editor Jobs in Tampa, FL

 

And while the head is off, you can address having water lines behind the head. I have a neat heater delete setup from Trogdor that you should run. Plumb the turbo coolant return into the water neck, cap off you iacv coolant loop, and you're done. Let me know if you need anything.

If you want to get an Apexi, call up Phase2. I had no problem getting 2 of them immediately. They even sorted out the boxing problem that Apexi has been having.

 

me and a few others are in need of a head gasket (the better one of course) could there be a group buy or am I too late?

 

Patrick,
If you are warped that bad, then you should check your bore distortion... Make sure you still have cross thatch on the bores so that you're rings are not siezed from the high temp piston expansion.

Martin
XAT

 

Thanks for the information. Dan if this happens again I am calling you!
Epstien, I will get a hold of you. Thanks Martin, If I have any questions I will call you.

 

we will rebuilt it better and stronger than ever. patrick has really good skills at the track. fun ride along.