my clutch fan on my s13 keeps coming apart.the bearings come loose an the clutch then needs to be replaced this is the third one im not gonna put in.so what i wanna do is,put a electric fan on.but then i run into a prob it still has the original fan that bolts against the rad.and that fan dosent provide enough cooling and there isnt any room to put an other fan there. no my question is has anyone put a fan against the outside against the condensor? any help would be greately appectiated thanks in advance...

 

the guy who had my car before me removed the clutch fan and put altima fans on it. No overheating problems and wasn't a big draw on the alt.

 

take out the stock fan and put the electric fan in its place maybe??

 

well the only prob is that i dont think the little fan that is already there will be enough to cool it infact i know.

 

jus get 2 12inch fans or altima fans or ford tauras fans

 

yeah when i had siad that i thought you were infering tht you were getting a new bigger fan or two smaller ones.
but +1 on that^

 

i think im just gonna get a fan and put it on the outside of the condensor,it will have two fans then.

 

Are you using new Nissan oem fan clutches? Is your fan blade itself out of balance ? how about the water pump pulley? there are a few reasons this could be happening. my fan clutch goes all the way to 9300 and I don't have problems with it coming apart.

 

no im using autozone clutchs its not the water pump pully because i can see where the movement is coming from. and its deff the clutch , the clutches have bearings in them and they keep coming apart idk.

 

check your belts and remove the small fan and put two fans in its place and use the one you removed and put that one on the other side.Or dont even use the little one.