powdercoated new brakes!
Will Drift For Tires
Thread Starter
Join Date: Dec 2005
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
powdercoated new brakes!
just one so far. doing the rest this weekend...
pics on the car in a week or so
pics on the car in a week or so
__________________
Nissan North America - Canton
Nissan North America - Canton
it sounds like you did it the way you worded it? you just use special powder coat paint and oven them up, or do u have the right setup? if so i wnat mine redone lol.
if u want polish letters u can just file off the stuff and it shines...if not its a PITA masking up the lettering.
if u want polish letters u can just file off the stuff and it shines...if not its a PITA masking up the lettering.
Will Drift For Tires
Thread Starter
Join Date: Dec 2005
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
i got a powder coating system from eastwoodco.com and the gold powder coating. the fumes from the powder are toxic so they tell you about 4 or 5 times not to use your house oven so i did mine in the grill on the top shelf lol. it has a thermometer so i was able to regulate it at 400 degrees.
to get the powder to just go on the emblem would seriously be a pain in the ass, so im gonna try and find some heavy duty or high heat paint and hand paint the emblem black. theyre turning out nicely so far though.
to get the powder to just go on the emblem would seriously be a pain in the ass, so im gonna try and find some heavy duty or high heat paint and hand paint the emblem black. theyre turning out nicely so far though.
__________________
Nissan North America - Canton
Nissan North America - Canton
Will Drift For Tires
Thread Starter
Join Date: Dec 2005
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
oh and i bought all four calipers and the e-brake assembly and i was wondering if anyone knew of any little trouble spots anyone had intalling any part of the brakes and e-brake?
__________________
Nissan North America - Canton
Nissan North America - Canton
so you have the z32 hub? because thats the only waht the ebrake works. Get the z32 master it makes a huge difference. set up a speed bleeder, cuts the job time in half.
__________________