lowering my car???
Sphincter Say's What?
Joined: Sep 2003
Posts: 1,688
Likes: 0
You have to unbolt the lower sway bar and the 2 holes will line right up. Once you get the strut back up you just have to connect the sway bar and your done and can move on to the next one.
__________________
i wanna go fast
Joined: Jan 2002
Posts: 978
Likes: 0
using the jack to raise the lca is the key. do NOT try and lift the brake/hub assembly with your back.
also, losen the top bolts of the strut a little so you can move it back/forth.
there is your answer.
also, losen the top bolts of the strut a little so you can move it back/forth.
there is your answer.
Thread Starter
iMpoRTtUnEr_aDdiCtIon
Joined: Jun 2006
Posts: 110
Likes: 0
Got the front installed.I used the floor jack to raise the strut up so I can align the 2 holes on the strut...perfect fit.now I have to do the same on the back today or tomorrow.if it doesn't rain.I wonder if this a lot dificult to install than the front.thanks for the help guys.I appreciate all the infos...
Last edited by jDm_gArAge; Jul 21, 2006 at 08:11 AM.
Thread Starter
iMpoRTtUnEr_aDdiCtIon
Joined: Jun 2006
Posts: 110
Likes: 0
heres the finished touch from the front....I finally start using my ssr type X rims..Tomorrow I'll be working on the back.Thnxs guys forall the help.....heres some pics so far.
