Nissan/Infiniti Tech SR20DET? RB26DETT? VQ35DE? What's it all mean? Find out here!

Who's ready for the 6sp KA24DE/SR20DET?

Thread Tools
 
Old Dec 6, 2004 | 09:30 AM
  #1 (permalink)  
Matt Vassallo's Avatar
Thread Starter
lifelong learner
 
Joined: Jul 2000
Posts: 6,840
Likes: 0
Default Who's ready for the 6sp KA24DE/SR20DET?

Well, it looks like the folks down in miami (BYP) did it to a couple of their cars.

600+ whp.

check this thing out:



yeah so byp pretty much shut everybody up!!

I have a 2004 Infiniti G35 6SP transmission BRAND NEW 0009 MILES ON IT-- for sale (proven to work with SR/KA with adapter plate )

$400 obo.
__________________
Advocate for the People's Republic of Awesome
rest in peace tim.
Reply
Old Dec 6, 2004 | 10:08 AM
  #2 (permalink)  
_Charles_'s Avatar
formerly 'RiceRocket'
 
Joined: Jun 2000
Posts: 5,691
Likes: 0
Default

details? $400 for the whole Tranny? How is the gearing for drifting? how much is the adapter plate? everything else lines up?

Charles
__________________


1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com
Reply
Old Dec 6, 2004 | 10:14 AM
  #3 (permalink)  
Jeff240sx's Avatar
Cpt. Negative
 
Joined: Feb 2003
Posts: 2,597
Likes: 0
Default

Adaptor plate needs to be custom. Seems that with an adaptor plate the input shaft would need to be a bit longer, but I'm unsure of that. The tranny itself is massive, so some tranny-tunnel customization might need to happen (aka - Big hammer to little tunnel).
However, Matt, if you'd like to help with the fabrication, I'll buy it and pay you.
-Jeff
__________________
** This space reserved for someone else's witty quote **
Reply
Old Dec 6, 2004 | 10:18 AM
  #4 (permalink)  
TNathe's Avatar
Registered User
 
Joined: Jan 2003
Posts: 18,565
Likes: 0
Default

You won't put a six speed in your car! (hoping you/someone does)
__________________
Reply
Old Dec 6, 2004 | 10:23 AM
  #5 (permalink)  
HaloZ's Avatar
highway whore
 
Joined: Oct 2003
Posts: 448
Likes: 0
Default

400 bucks... for a new 6 spd. dosent sound right to me.. =\
__________________
Reply
Old Dec 6, 2004 | 10:24 AM
  #6 (permalink)  
Matt Vassallo's Avatar
Thread Starter
lifelong learner
 
Joined: Jul 2000
Posts: 6,840
Likes: 0
Default

Details are this. you remove the metal plate that goes in between the motor trans

you weld a plate on with the correct bolt holes that is 1/4" thick out of aluminum. now the trans bolts to it. you make sure you use all the bolts and tht all the welds are strong. then you're in business.

throwout bearing depends on which clutch you use, you may have to drill some holes in your flywheel to use the 350z clutch, or use a custom throwout bearing off of a pulsar ( most commonly used) and use the sr clutch. or a twin plate.

the gear ratios are closer and shorter than the 5sp that the 240sx / silvia has. 6th gear in this trans is equal to 5th gear in the 240sx. that means 1-5 is MUCH closer and shorter, plenty of gear selection for drifting.
__________________
Advocate for the People's Republic of Awesome
rest in peace tim.
Reply
Old Dec 6, 2004 | 10:25 AM
  #7 (permalink)  
Matt Vassallo's Avatar
Thread Starter
lifelong learner
 
Joined: Jul 2000
Posts: 6,840
Likes: 0
Default

Halo, I picked it up from a friend.

It's 100% legit, let me see if i have a pic or two



they are on Regina's PC, i don't have access to the pics righ tnow, you're welcome to come to oldsmar and see it for yourself.
__________________
Advocate for the People's Republic of Awesome
rest in peace tim.
Reply
Old Dec 6, 2004 | 10:34 AM
  #8 (permalink)  
Jeff240sx's Avatar
Cpt. Negative
 
Joined: Feb 2003
Posts: 2,597
Likes: 0
Default

First:3.794
2nd: 2.324
3rd: 1.624
4th: 1.271
5th: 1.000
6th: 0.794

1st: 3.321
2nd: 1.902
3rd: 1.308
4th: 1.000
5th: .838

Oh ya.. drifting setup.
-Jeff
__________________
** This space reserved for someone else's witty quote **
Reply
Old Dec 6, 2004 | 10:36 AM
  #9 (permalink)  
Matt Vassallo's Avatar
Thread Starter
lifelong learner
 
Joined: Jul 2000
Posts: 6,840
Likes: 0
Default

5th in a KA / Silvia k's is .759 not .838 . 838 is only on CA / Silvia Q's.
__________________
Advocate for the People's Republic of Awesome
rest in peace tim.
Reply
Old Dec 6, 2004 | 10:40 AM
  #10 (permalink)  
Jeff240sx's Avatar
Cpt. Negative
 
Joined: Feb 2003
Posts: 2,597
Likes: 0
Default

Meh... I grabbed the info from www.200sx.org for their S13/S14 gear ratios. Maybe they are listing the CA as an SR for some reason.
-Jeff
__________________
** This space reserved for someone else's witty quote **
Reply



All times are GMT -8. The time now is 07:17 AM.