calling all spec v's
Originally posted by supaflytiger
I think everyone on TR knows your feelings on the car by now. You dont have to go into every thread that mentions the name and start bashing. We get the point.
I think everyone on TR knows your feelings on the car by now. You dont have to go into every thread that mentions the name and start bashing. We get the point.

what do you have done octagon?
Are we talking about all motor versus all motor in a straight line? Or on a road course? You guys might think that the Spec is a turd.. but if you put the right tires on it and a few suspension tweaks, it'll tear ass through the curves.
In a straight line, with a good driver and tires, they run low 15's stock (15.10-15.30). With intake, header, exhaust.. mid 14's. (14.70ish). With cams, BSR kit, JWT clutch and flywheel... low 14's (14.10-14.20ish).
Travis
In a straight line, with a good driver and tires, they run low 15's stock (15.10-15.30). With intake, header, exhaust.. mid 14's. (14.70ish). With cams, BSR kit, JWT clutch and flywheel... low 14's (14.10-14.20ish).
Travis
__________________
www.fi-r.net
Nissan Performance
www.fi-r.net
Nissan Performance
Have you driven a B15 SE-R? They're not THAT bad... Certainly much better than the 200sx SE-R was. The B13 SE-R... we all know.. is the best. But, the B15 SE-R isn't that horrible.
Travis
Travis
__________________
www.fi-r.net
Nissan Performance
www.fi-r.net
Nissan Performance
Originally posted by dr. octogon
yes, i have.. too short of gearing, too soon to redline.
no torque.
i just really, really dont like the cars at all.
yes, i have.. too short of gearing, too soon to redline.
no torque.
i just really, really dont like the cars at all.
No torque? Are you crazy? 101mm stroke and 1.43:1 rod/stroke ratio make sure that you get ALL the TQ that you need.. Much more than a KA at that. Ask Scott... he tuned and rode in the 400whp pump gas Spec V that we built.
Travis
__________________
www.fi-r.net
Nissan Performance
www.fi-r.net
Nissan Performance


