power steering question
The Hebrew Hammer
Joined: May 2003
Posts: 344
Likes: 0
Originally posted by Taylor Durden
remember, that bolts takes a 15/16" size socket!
remember, that bolts takes a 15/16" size socket!
__________________
< < < < < PANDA FINGA!! > > > > >
Thread Starter
Uhhh...
Joined: Dec 2003
Posts: 4,865
Likes: 0
Well I replaced the washers and its now leaking from the fitting on the hose, guess I'll have to get a new one. Any places stock them around here and any idea how much they run? I found it online for about $95. Let me know. Thanks
__________________
Tennessee Vols
Tennessee Vols
Registered User
Joined: Aug 2004
Posts: 36
Likes: 0
well i dont know where u live but take the hose and go to a hydraulics shop and they will make custom hose with new fitings for 35 buck i did mine after geting 3 different hoses for 25 a piece and got sick of it they guarantteed me if i brake it they will replace it for free they told me the hose is made to withstand 4000 lbs of pressure i know how this feels and good luck i got mine done at this place in clearwater off of ft harrison south after donw town
Registered User
Joined: Jul 2004
Posts: 611
Likes: 0
Yea, I had this problem with my buddies altima take it to a shop and get a whole new hose and fittings and stuff.. BTW Do you use power steering fluid to fill it up with.. That stuff eats away the seals on a nissan. Use ATF it sounds weird but trust me it works.. no more problems after I did that for him. ATF is your freind.
