Nissan/Infiniti Tech SR20DET? RB26DETT? VQ35DE? What's it all mean? Find out here!

bad thermostat?

Thread Tools
 
Old Aug 10, 2004 | 09:36 AM
  #1 (permalink)  
J-Dizzle's Avatar
Thread Starter
Still Addicted to Boost
 
Joined: Jan 2003
Posts: 9,143
Likes: 0
Default bad thermostat?

ok was riding around earlier and my temp gauge is acting up,,the car is not overheating> the needle will bounce around a between half way and cold , i dont think headgasket is a problem as too i dont hear any hissing , no bubbling of coolant and all the other signs of blown HG* ...i hope this is all it is...ohh plus i put my hand on the upper radiator hose and i can squeeze it all the way , like nothing flowing thru the damn thing, and the lower one almost looks like its getting bigger, not real fast or anything but something to watch...let me know guys....

jason
__________________
Don't Text And Drive
Reply
Old Aug 10, 2004 | 09:48 AM
  #2 (permalink)  
Ralph's Avatar
TR Balla Donor Supreme
 
Joined: Aug 2000
Posts: 1,520
Likes: 0
Default

Check for the obvious...coolant, leaks, wiring/plug to temp sensor. It may have come loose or corroded. I think the general rule for the hoses is, if your have the car running and the upper radiator hose is hot and the lower radiator hose is cold to the touch, then you have a problem. I
__________________

TR Profile
Myspace Profile
Reply
Old Aug 10, 2004 | 10:22 AM
  #3 (permalink)  
J-Dizzle's Avatar
Thread Starter
Still Addicted to Boost
 
Joined: Jan 2003
Posts: 9,143
Likes: 0
Default

naw upper isnt hot and the bottom isnt cold....going to take the thermo out tomorrow and see...pretty confident thats what it is
__________________
Don't Text And Drive
Reply
Old Aug 10, 2004 | 11:29 AM
  #4 (permalink)  
jk240sx's Avatar
coast to coast
 
Joined: Jan 2003
Posts: 325
Likes: 0
Default

since you have check obvious, sounds like thermo is suspect. when pinching top hose, you should feel that you are restriciting flow. if bad thermo, then you won't feel like you are restricting flow.

replace thermo, bleed, bleed, bleed and all should be good.
__________________
jerry/

Reply
Old Aug 11, 2004 | 10:22 AM
  #5 (permalink)  
J-Dizzle's Avatar
Thread Starter
Still Addicted to Boost
 
Joined: Jan 2003
Posts: 9,143
Likes: 0
Default

well i started to replace...key word started......im going to need a new hose and such but when i removed the hose from the thermo housing...it was so full of coolant(no oil in it)* but r the bolts 10mm? cause i was trying to fit sockets and 9mm was close ..so it must be a 10mm..let me know

jason
__________________
Don't Text And Drive
Reply
Old Aug 11, 2004 | 10:25 AM
  #6 (permalink)  
StealthmodeS14's Avatar
Registered User
 
Joined: Mar 2004
Posts: 178
Likes: 0
Default

yep...they'er 10mm..three of them in total.

-Bill
__________________
Holla back youngin'...
Reply
Old Aug 11, 2004 | 10:27 AM
  #7 (permalink)  
J-Dizzle's Avatar
Thread Starter
Still Addicted to Boost
 
Joined: Jan 2003
Posts: 9,143
Likes: 0
Default

im assuming theres one on the bottom?...
__________________
Don't Text And Drive
Reply
Old Aug 11, 2004 | 10:28 AM
  #8 (permalink)  
StealthmodeS14's Avatar
Registered User
 
Joined: Mar 2004
Posts: 178
Likes: 0
Default

you assumed correct....

-Bill
__________________
Holla back youngin'...
Reply
Old Aug 11, 2004 | 10:29 AM
  #9 (permalink)  
MaxType 240's Avatar
All Around Maxed
 
Joined: Jul 2003
Posts: 587
Likes: 0
Default

Yes, on the bottom. I stripped that one and had to re-thread it. Be careful.

Jesse
Reply
Old Aug 11, 2004 | 10:32 AM
  #10 (permalink)  
J-Dizzle's Avatar
Thread Starter
Still Addicted to Boost
 
Joined: Jan 2003
Posts: 9,143
Likes: 0
Default

ya i will just need to find a 10mm socket? i broke my other one wj\hile owrking on the supra last summer
__________________
Don't Text And Drive
Reply



All times are GMT -8. The time now is 10:58 PM.