anyone have their A/C lines for the sr20det... my s13 chassis stock lines don't line up, plus they run almost right through the path of the intake? wondering if i should give them a shot or go to a hose/coupling place and just have them make it fit?

 

go to amazon hoses and stuff, theyll get it done right

 

well the thing is i don't have the SR lines. The sr compressor i have does have the fittings still on it though, so they are gonna have to cut the ka lines, possibly extend a little then weld the SR fiitings onto the newly extended KA lines, are they gonna be able to do that? or should i just go find SR ac lines?(something i would rather not do)

 

For $20

 

I know the front AC line from a dual cam will bolt on to the SR compressor. Check to see if the rear dual cam line will bolt to the SR compressor as well. If it does, then you just need it extended a little, which is cheap.

 

yes the front line fits fine.. i think the smaller fitting i believe.
BUT the line that goes around the back of the valve cover, the larger fitting is no good.
also i live in gainesville, but am goin home to west palm beach until the end of the month, which is where my car is, can any hose and fitting place do this? there's a guy @ Florida Brake and Hose and he told me to bring it over for him to see, u guys think he'll be able to do it?