Tampa Racing

Mitsubishi Tech AWD and all things DSM Central

GM MAFT help

Thread Tools
 
Old Aug 11, 2007 | 05:19 PM
Share
  #1 (permalink)  
fitbikeco's Avatar
fitbikeco
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 1,010
Likes: 0
Default GM MAFT help
I just put in my MAFT and 3in Gm MAF I dont know what to set the settings at im tuned with An S-AFC and i was told you just set everything on 0 can some one help me with this
__________________
Reply
0
Old Aug 11, 2007 | 06:03 PM
Share
  #2 (permalink)  
TrboANTsi's Avatar
TrboANTsi
FL,..gods waiting room!!
 
Joined: Oct 2006
Posts: 1,009
Likes: 0
Default
nope, i have hte instructions somewhere in the garage. go to
http://www.fullthrottletech.com/atta...1&d=1151351071

those are the manuals for the 2g. dunno if that what you have but you dont just zero it out really.
__________________
Reply
0
Old Aug 11, 2007 | 06:19 PM
Share
  #3 (permalink)  
fitbikeco's Avatar
fitbikeco
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 1,010
Likes: 0
Default
i have a 1g and i was told to set AUX on 0 and BASE on 2 cause i have 550 injectors and everything else on 0 cause im uing an AFC
__________________
Reply
0
Old Aug 11, 2007 | 06:36 PM
Share
  #4 (permalink)  
TrboANTsi's Avatar
TrboANTsi
FL,..gods waiting room!!
 
Joined: Oct 2006
Posts: 1,009
Likes: 0
Default
base is supposed to be set at the base setting for a stock car. not the injectors you have now..i have my set to the 450s even though i 660s and my car idles fine. FULL THROTTLE SPEED - Store Front Page theres a lnk for the 1g too.
__________________
Reply
0
Old Aug 11, 2007 | 07:27 PM
Share
  #5 (permalink)  
fitbikeco's Avatar
fitbikeco
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 1,010
Likes: 0
Default
ya setting BASE 2 is 450s and i have it set their and i start it and it runs fine for about 10 sec then it just starts dieing
__________________
Reply
0
Old Aug 11, 2007 | 07:33 PM
Share
  #6 (permalink)  
TrboANTsi's Avatar
TrboANTsi
FL,..gods waiting room!!
 
Joined: Oct 2006
Posts: 1,009
Likes: 0
Default
did you connect the wire to the rpm signal? i forgot what color.
__________________
Reply
0
Old Aug 11, 2007 | 07:53 PM
Share
  #7 (permalink)  
fitbikeco's Avatar
fitbikeco
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 1,010
Likes: 0
Default
the white one yes and i jusat put a gm maf from a running car on it and it still runs good at idle but when you hit the gas its like nothing is their
__________________
Reply
0
Old Aug 12, 2007 | 05:20 PM
Share
  #8 (permalink)  
GsT Racer's Avatar
GsT Racer
back in a 4g63
 
Joined: Jul 2006
Posts: 2,549
Likes: 0
Default
i dont think you can just plug it in and go, it needs to be tuned. i know with the gm-maf setup you dont need afc anymore.
__________________

"All I can tell you is... the gun had an owner, something happened, and suddenly the gun didnt have an owner anymore."
Reply
0
Old Aug 12, 2007 | 06:05 PM
Share
  #9 (permalink)  
fitbikeco's Avatar
fitbikeco
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 1,010
Likes: 0
Default
so your saying you cant set it all settings at zero like idle,mid and WOT even if your using afc
__________________
Reply
0
Old Aug 13, 2007 | 08:00 PM
Share
  #10 (permalink)  
Jap's Avatar
Jap
VTEC Out
 
Joined: Jul 2002
Posts: 10,022
Likes: 0
Default
As I told you 0 everything out and start driving around and looking at the wideband and turn the knobs till you get it decent ..

AFC should just be sued to fine tune it
__________________
R.I.P. Kevin "Slo-Si" Gonzalez

Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup

Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
Reply
0



Advanced Search

All times are GMT -8. The time now is 02:27 PM.