Approx Cost of Repairs
Approx Cost of Repairs
i have a friend with a 95 non-turbo who's timing belt jumped about 3 teeth, any guess on the damage and cost of repairs?
__________________
Enter Signature Here
Enter Signature Here
with jumping 3 teeth on the 420A motor you want to make sure none of the rods have gotten bent/warped. The timing job isnt too hard, you can do it yourself if you pay attention to all 3 timing points on the motor. Get a Chiltons and go to town.
he didn't know what was wrong with it so it kept trying to start it, the timing belt was jumping like crazy and the engine was clickin and clankin trying to start.
__________________
Enter Signature Here
Enter Signature Here
ouch... there isnt really a way to tell from just the description... doesnt sound good though. They need to open her up and get inside to see exactly what is damaged. Take it a trusted mechanic....wont be cheap...
__________________
Eric
AIM: Ep41382
Eric
AIM: Ep41382
Well, for a timing job you can take it to any particular shop you trust. To check to see if the rods and such may have been bent like ^^ said, you need to open her up and check. If you dont know what you are doing I would suggest engine lab. They are expensive however are very good at rebuilding if need be and can give you a warranty on the work too.