Mazda Tech If your Mazda is a brap brap,or a zoom zoom, then this is your place.

AUTO Transmission behind 13BT

Thread Tools
 
Old Sep 23, 2008 | 02:06 PM
  #1 (permalink)  
chrispiecridder's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 4
Likes: 0
Default AUTO Transmission behind 13BT

OK i was wondering if you can mount an auto tranny out of a GXL on the back of a 13BT because the turbo FC never cam in an auto
Reply
Old Sep 23, 2008 | 02:42 PM
  #2 (permalink)  
chrispiecridder's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 4
Likes: 0
Default

ok i forgot to say why i ask... i am in a wheelchair and cant drive a manual and i am going to start working on my 7 that i was working on befor i was paralized but i can no longer drive a manual
Reply
Old Sep 23, 2008 | 04:06 PM
  #3 (permalink)  
1sleeping7's Avatar
"a beautiful man"
 
Joined: May 2008
Posts: 322
Likes: 0
Default

I'm not 100% sure but I think that they are interchangable but I could be wrong.
Reply
Old Sep 23, 2008 | 06:16 PM
  #4 (permalink)  
chrispiecridder's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 4
Likes: 0
Default

yeah if is interchangeable i will be set i know i will have to rebuild it to make it stronger and work for what i want it to do.
Reply
Old Sep 24, 2008 | 04:12 AM
  #5 (permalink)  
Niburu's Avatar
Sic semper tyrannis
 
Joined: Nov 2006
Posts: 794
Likes: 0
Default

you might wanna check and do some research on the www.rx7club.com , a 3rd gen auto might also work
the FC auto trans can probasbly handle stock power levels of the TII but anymore I'd definitely look into beefing it up
__________________
2011 Subaru Forester - the daily driver kid hauler
1990 Miata - track whore
LOVE THIS TAMPA CAR RACING SCENE
Reply
Old Sep 24, 2008 | 09:29 AM
  #6 (permalink)  
chrispiecridder's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 4
Likes: 0
Default

yeah because i want the engine to make about 400 hp at the wheels i am going to race it so i am going to cage it and completely do it over i am in the processes of striping it right now.
Reply




All times are GMT -8. The time now is 06:12 PM.