Mazda Tech If your Mazda is a brap brap,or a zoom zoom, then this is your place.

Drip drip Drip

Thread Tools
 
Old Nov 19, 2007 | 11:17 PM
  #1 (permalink)  
MasterTang's Avatar
Thread Starter
Look Good Ride Slow..CSVT
 
Joined: May 2005
Posts: 378
Likes: 0
Default Drip drip Drip

when my 88 N/A FC is turned off the over flow for the coolant drips a good amount out...I go and pop the hood and the coolant hoses are solid stiff full of air. Why is is doing this ?
__________________
I Drive a CSVT...not 2 be confused with the Caddie...Its my love. (Damn Car!!!)
Dance !! its good for you....


http://www.myspace.com/mastertang
Reply
Old Nov 20, 2007 | 05:07 AM
  #2 (permalink)  
RX007CYM's Avatar
Lucky
 
Joined: Feb 2004
Posts: 1,081
Likes: 0
Default

Sounds like it is over filled...

Flush the system and burp it. Make sure you do not over fill it and you should be good as new.
__________________
Originally Posted by JustMiata
It's like this: The toadstool juice fires through the unicorn injector into the fairy dust chamber, where the tiny wizard does his secret work...Then a gang of keebler elves get hopped up on the crystalline byproduct of the wizard's tinkering, (they smoke it) and then the elves push the spinning triangle through a series of dimensional portals to a final realm codenamed the "exhaust port..." At least that's my undersanding of rotary sorcery...
Reply
Old Nov 20, 2007 | 01:40 PM
  #3 (permalink)  
MasterTang's Avatar
Thread Starter
Look Good Ride Slow..CSVT
 
Joined: May 2005
Posts: 378
Likes: 0
Default

Originally Posted by RX007CYM
Sounds like it is over filled...

Flush the system and burp it. Make sure you do not over fill it and you should be good as new.
hehehe i feel like a newb saying this but is burping the engine is cranking the engine 1 to 2 times ?
__________________
I Drive a CSVT...not 2 be confused with the Caddie...Its my love. (Damn Car!!!)
Dance !! its good for you....


http://www.myspace.com/mastertang
Reply
Old Nov 21, 2007 | 03:03 AM
  #4 (permalink)  
Rotary Buddha's Avatar
zero pistons
 
Joined: Aug 2004
Posts: 770
Likes: 0
Default

Read and learn young one.

Troubleshooting RX-7 Cooling Problems
__________________
Originally Posted by rotarykidd
you have no idea how many TR members id kill to have this car for just a day...
Reply
Old Nov 21, 2007 | 05:18 AM
  #5 (permalink)  
RX007CYM's Avatar
Lucky
 
Joined: Feb 2004
Posts: 1,081
Likes: 0
Default

Originally Posted by MasterTang
hehehe i feel like a newb saying this but is burping the engine is cranking the engine 1 to 2 times ?
It is not. To burp the system you simply squeeze the coolant hoses to free any air bubbles trapped in them.
__________________
Originally Posted by JustMiata
It's like this: The toadstool juice fires through the unicorn injector into the fairy dust chamber, where the tiny wizard does his secret work...Then a gang of keebler elves get hopped up on the crystalline byproduct of the wizard's tinkering, (they smoke it) and then the elves push the spinning triangle through a series of dimensional portals to a final realm codenamed the "exhaust port..." At least that's my undersanding of rotary sorcery...
Reply




All times are GMT -8. The time now is 12:51 PM.