How to power water pump in lht jrsc intercooler?
Thread Starter
Registered User
Joined: Sep 2009
Posts: 1
Likes: 0
How to power water pump in lht jrsc intercooler?
This mgiht be a dumb question, but how do you power the water pump for the lht jrsc intercooler? i think one of the wires is the ground and the other says 12v, but where do i get the power from?
John @ LHT Performance
Joined: Sep 2003
Posts: 2,120
Likes: 0
There's several places to get 12V, on most Honda's there is male spade connectors in the fuse box that supply 20amps that's more than enough for the pump. You can use one of the supplied female spade connectors for the kit.
__________________
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
