Ok im not rice, do want to be diff.. and on top of that im getting a 88 HB with No hood, fenders,or bumper... in my garage ARE, 90-93 Teg carbon fiber hood, headlights, 2sets of fenders, another stock hood, and 2 front bumper covers, and one radiator upper support........Figure out where im going with this yet.. if so.. can it be done... if not.. thanks but no thinks.. YES I HAVE A MOTOR TO BACK IT UP......SO HELP ME OUT..

 

yes this is also what i am doing to my 89 hatchback you MUST only use 90-91 bumper thay are different from 92 93 the fender will stick out 1 1/2 from the door but if you get a side skirt it will look nice

 

and it will make it alot easier if you can get the integra top crosssup or you will need to cut some metel straps to keep the headlights down i will send you pictures of other hatchbacks and crx's with this same conversion or even better here are some good ones for crx http://www.geocities.com/mrskyliner343/Conversions.html

 

Thats what i wanted to here,,, YOU DA MAN....

 

Man I really don't like changing up stuff on the bodies of hondas but that nsx taillight conversion on that crx is pretty sick.

 

glad to help just make sure you take pictures when your done and to tell if you done no a 90-91 from a 92 93 bumper the middle lip on top the 90 91 comes up as for the 9293 it looks like a lilsmilieface

 

Yeah i know the diff. i have about 4 tegs once upon a time... thats why i have all the parts... i had a 92 gsr but it was damolished by a 03 expedition.."stupid fucking ladies on stupid fucking cell phone.... man i loved that car.. oh well...
So should i put the front end on my CRXsi or 88dx HB ... How hard is it to put the b17 obd 1 in the 88 dx..

 

well you still have the car CHANGE out All the wireing from the inegra and put it into the Hatch then you can use the speedometer to that way you have the 150Mph and 9K redline not to har if you have time

 

Your talking about changing the Interior Harness.. from the HB and put in the Teg.... Would it matter if the Teg Interior harness was auto or 5spd. Also Do i have to do this. I believe there are other ways to do it. Thanks

 

there are other ways of course you can just drop your integra speedo in there the rpm and speed will work fine you have to cut and splice and add 5 more wires if you want your fuel/temp and some backlights to work