nitrous works quick question
Thread Starter
h22 hatch
Joined: Sep 2001
Posts: 24
Likes: 0
nitrous works quick question
im installing nitrous works on my h22a.ok i got everything hooked up but the fuel line for the solnied. so where do i hook it up at.
__________________
dead once again
dead once again
i stepped on my weiner!
Joined: Oct 2002
Posts: 2,994
Likes: 0
use some type of "t" fitting from ACE hardware, or autozone, brass or plastic, cut the fule line to the fuel rail in half, insert the "t" and branch it of to your solinoid, you may need a NPT fitting depending if you have steel braided line, running to it or just a rubber hose with a fitting on the end.
about 5.00 bucks worth of parts
about 5.00 bucks worth of parts
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
it just kinda went BOOOMM
Joined: Oct 2002
Posts: 0
Likes: 0
hey you gotta get a T fitting and tap it into the line. dont "cut" anything...that's bad...take it to a pro if you don't know how to do it. find a local nitrous dealer and order a t fitting. Then take it somewhere and they'll do it for you. But don't cut anything.
__________________
........settling for another D series... oh well.
........settling for another D series... oh well.
