Honda/Acura Tech Honda tech discussion.

98 integra h22 swap main relay problem...need help please...

Thread Tools
 
Old 01-23-2013, 06:02 PM
  #1 (permalink)  
Registered User
Thread Starter
 
b18turbo's Avatar
 
Join Date: Jan 2011
Posts: 496
Likes: 0
Received 0 Likes on 0 Posts
Default 98 integra h22 swap main relay problem...need help please...

ok so here is the run down. I have a 98 integra ls...I swapped a f20b dohc as for ecu I have a p06 w/h22 base map MY MAIN RELAY IN NOT CLICKING ON BUT WHEN I JUMP THE HARNESS I HEAR THE FUEL PUMP KICK ON THEN THE CAR WILL START. I CHECKED MY FUSES,ALL MY GROUNDS AND STILL NO START.........SO I HAD A EXTRA MAIN RELAY INSTALLED IT BUT STILL NO CLICK/CRANK. I HAD TO RELPACE MY IGNITION SWITCH WITH A EG IGNITON DUE TO LOOSING THE KEYS COULD THAT BE A PROBLEM..ALSO I REPLACED THE DASH TO CHANGE INTERIOR TO BLACK..... I AM STARTING TO GET FRUSTRATED ON WHAT IT CAN BE...ANY HELP/TIPS WILL BE GREATLY APPRECIATED THANKS OR YOU CAN TXT ME AT 813 842 9094
Old 01-24-2013, 10:21 AM
  #2 (permalink)  
35.5 psi, stock sleeves
 
BluRRboSi's Avatar
 
Join Date: Jan 2005
Posts: 1,834
Likes: 0
Received 0 Likes on 0 Posts
Default

Koeo the fuel pump primes?
__________________
PUREBRED PERFORMANCE
Fabrication & Tuning Services
813-451-7547 or 813-712-0202
Www.PPETUNED.com <~~ WEBSITE
Curious on honda/acura Ecu Chipping and dyno tuning? Call or visit the website above. Hondata/Neptune/Ectune/Crome Pro. Tuning available for most other systems and platforms as well. DYNOJET
Old 01-24-2013, 07:13 PM
  #3 (permalink)  
Registered User
Thread Starter
 
b18turbo's Avatar
 
Join Date: Jan 2011
Posts: 496
Likes: 0
Received 0 Likes on 0 Posts
Default

koeo? and yes the fuel pump primes but only when I jump the harness by touching 2 ends of the relay clip together....
Old 01-25-2013, 05:37 AM
  #4 (permalink)  
Pops
 
BoostedRacerDad's Avatar
 
Join Date: Oct 2008
Posts: 2,095
Likes: 0
Received 0 Likes on 0 Posts
Default

When you say you changed the ignition switch, did you change just the mechanical portion or mechanical/electrical portion?
__________________

Jdm b18c R LSD CRX si
TR "Old Skool EF" Member #96
JoKie TuNinG
RANGCRX BUILT TYPE R
StricKlyMT
727-510-6301
Old 01-25-2013, 05:50 PM
  #5 (permalink)  
Registered User
Thread Starter
 
b18turbo's Avatar
 
Join Date: Jan 2011
Posts: 496
Likes: 0
Received 0 Likes on 0 Posts
Default

I only changed the mechanical portion due to last owner b4 swap lost key
Old 01-26-2013, 07:47 AM
  #6 (permalink)  
Pops
 
BoostedRacerDad's Avatar
 
Join Date: Oct 2008
Posts: 2,095
Likes: 0
Received 0 Likes on 0 Posts
Default

Take the electrical portion of the switch apart and I bet you will find corroded contacts or arced contacts. Clean them up and put die electric grease on them.
How to replace the ignition switch or troubleshoot (Honda, Acura)
__________________

Jdm b18c R LSD CRX si
TR "Old Skool EF" Member #96
JoKie TuNinG
RANGCRX BUILT TYPE R
StricKlyMT
727-510-6301
Old 01-27-2013, 05:28 AM
  #7 (permalink)  
Registered User
Thread Starter
 
b18turbo's Avatar
 
Join Date: Jan 2011
Posts: 496
Likes: 0
Received 0 Likes on 0 Posts
Default

ok thanks.... will try that is there any other possibilities? because the car is about 2miles away from where I stay I hate to go back and forth...I NOTICED THE EG IGNITION HAS A EXTRA SLOT (IN THE MIDDLE) FOR A SENSOR COULD THAT BE A PROBLEM..IS THERE A GROUND UNDER THE DASH I SHOULD LOOK FOR?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Chris_2jz
Honda/Acura Tech
10
03-13-2010 09:37 AM
nipple69
Honda/Acura Tech
0
03-27-2004 08:48 PM



Quick Reply: 98 integra h22 swap main relay problem...need help please...



All times are GMT -8. The time now is 11:59 PM.