Ok i have a bseries n a crx i broke my driver side mount bolts inside the motor tryd drilling them no luck i was wondering has anyone ever made a mount to bolt to the front of the block to mount and hold up i have seen a mount done lik tht on my friends ls if anyone can do it or has a mounting bracket lik tht let me kno need my car back running asap call or txt me at 8137704076 thanks

 

Never seen one. There doesn't even appear to be enough room to get a right angle drill with a left hand bit in there.

 

I got the motor high enough so i cud drill it i would have taken the motor out but no engine jack so and I'm tired of jus drilling at it with no luck making the hole wider so i was jus thinking of making a mount

 

You need a left hand bit then, as you weaken the bolt by drilling it the LF hand bit will back it out. You will be temping fate with a EZ out.lol

 

Napa has them. https://www.napaonline.com/Catalog/R...&Dk=1&Dp=3&N=0

 

Broke a ez out inside the bolt thts why its being a bitch to drill thru but ill try something I'm gonna b off 4the next to days so hopefully i get this done so i can start my other build

 

Help

 

Easy outs suck big time..

 

^Note this man's signature. You are in trouble. You might be able to shatter the EZ out or a carbide endmill would do work on it. When all else fails you need, I believe it is called a EDM machine. It is like a Air arc cutter (reverse welder).