Nitrous on a Built B18C
Guest
Posts: n/a
Vehicle of choice: Chevy??? you have a B18c in a chevy???
well to answer your question i would not sray any NOS on that setup your compression is too high you will blow that thing up and melt some pistons... so i say DONT DO IT!!!
-Keith
well to answer your question i would not sray any NOS on that setup your compression is too high you will blow that thing up and melt some pistons... so i say DONT DO IT!!!
-Keith
get big or die trying!!
Joined: Jun 2000
Posts: 3,933
Likes: 0
i know of a local guy with your same set-up 11.1comp on srp pistions and eagle rods in a b18c he sprays a 60 shot but that's with 310 injectors and a walbro 255 fuel pump. he has run a best of 12.6 on slicks in a 94 civic si h/b heavy car full interior.
Thread Starter
Registered User
Joined: Jul 2002
Posts: 0
Likes: 0
Well the B18C is in the DC2 chasis. There are guys round here running 100 shots direct port on stock internals so I wandering if I will be able to run more than that. oh by the way he has been running this engine for a year.
Registered User
Joined: Dec 2001
Posts: 258
Likes: 0
yeah, but i bet his rings are fucked.
100 on a stock motor, wtf is he thinking
im surprised it even lasted 2 times
he has 9.6 to 1 ratio you have 11:1
i wouldnt go spraying 100 shots all day long with that high of CR
i would stay at 55-75
get all the fuel needs and u should be ok
it only takes one bad spray to toast your motor
100 on a stock motor, wtf is he thinking
im surprised it even lasted 2 times
he has 9.6 to 1 ratio you have 11:1
i wouldnt go spraying 100 shots all day long with that high of CR
i would stay at 55-75
get all the fuel needs and u should be ok
it only takes one bad spray to toast your motor
Thread Starter
Registered User
Joined: Jul 2002
Posts: 0
Likes: 0
So even if you have forged internals you cant run much more than the 75 shot. The pistons and rings say they can be used for nitrous so I dont understand why I shouldn't be able to run more than 75 shot.
Thread Starter
Registered User
Joined: Jul 2002
Posts: 0
Likes: 0
So even if you have forged internals you cant run much more than the 75 shot. The pistons and rings say they can be used for nitrous so I dont understand why I shouldn't be able to run more than 75 shot.
Guest
Posts: n/a
With good tuning you can go up to 75. I don't want to say any higher just because, you do spend some green on those internals to ruin them so fast. Make sure you break in those components before spraying.
I think im gonna spray on my next set up.
I think im gonna spray on my next set up.
