what do i need to go from auto to manual?
Thread Starter
I do what I do
Joined: Aug 2009
Posts: 682
Likes: 0
what do i need to go from auto to manual?
i am gettign a new cat its auto i wanna change it to manual.
i need a trannyy.
i need shirt linkage.
i need ECU
anything else?
can someone help
17275511898
Justin
i need a trannyy.
i need shirt linkage.
i need ECU
anything else?
can someone help
17275511898
Justin
__________________
TR "Old Skool EF" Member #179
TR "Old Skool EF" Member #179
Registered Hater
Joined: Aug 2008
Posts: 3,246
Likes: 0
clutch and flywheel also if its not with the tranny if I'm not mistaken. Usually you have to wire up the reverse lights. I should post pictures of my auto to manual lol I swapped over the whole manual interior harness and cut out the center of my manual car that I wrecked and bolted it to the center of the manual lmao
Registered
Joined: May 2005
Posts: 104,928
Likes: 21
Generally I would go to the junkyard and get all the parts that a manual tranny car has that your auto tranny car does not have. Take a good look at your car first. Maybe photo the car so you have some kind of reminder.
If you can find that info, it will be a help to EFKidd as well as others.-Bob
If you can find that info, it will be a help to EFKidd as well as others.-Bob
clutch and flywheel also if its not with the tranny if I'm not mistaken. Usually you have to wire up the reverse lights. I should post pictures of my auto to manual lol I swapped over the whole manual interior harness and cut out the center of my manual car that I wrecked and bolted it to the center of the manual lmao
__________________
Here is the listings of ALL New Mexico Car Events Including Route 66 Anniversary
https://www.tamparacing.com/forums/t...ar-events.html
Top Car Club Meetings? Click a city
Got a video? Email it to Bobfixesitup@yahoo.com
________________________________________________
Keystone Motor Club (Founded 2012)... Free car show Every 3rd Saturday, newsletter is
https://www.tamparacing.com/forums/e...-car-club.html
Keystone picture gallery is here:
https://carstoshow.com/eventdetails.aspx?eventid=93202
Veterans and Friends on First Saturday...Some pictures....
https://carstoshow.com/registerevent...eventid=102331
Port Richey Rod Run at Coast Buick GMC
https://carstoshow.com/registerevent.aspx?eventid=99114
50's Diner US19.... A Florida Attraction.
1730 US-19, Holiday Fl 34691 click: https://www.tamparacing.com/forums/t...acing.html CHRA sanctioned cruise-in.
Cruise-In; Free; Every Saturday 5-8PM plus 10% off the whole menu to cruisers
50's Diner pictures are here: https://carstoshow.com/eventdetails.aspx?eventid=93194
All Cars Every 2nd Saturday Free Breakfast: Since 2015 and more. click: https://www.tamparacing.com/forums/e...ast-tampa.html
Tampa Racing.com covers the Tampa car scene and supports many fund raisers, worthy causes and events that enrich our community. We hope you enjoy them all.
What do I do? ---- on-site *Aftermarket* spring/suspension installations --- on-site impact wrenching---street lowering with your own stock springs...........True Bi-xenon HID projector headlight conversions........ Much more at Bob's Garage!
https://www.tamparacing.com/forums/b...ontact-us.html
https://www.tamparacing.com/forums/b...e-senor-honda/
Here is the listings of ALL New Mexico Car Events Including Route 66 Anniversary
https://www.tamparacing.com/forums/t...ar-events.html
Top Car Club Meetings? Click a city
Got a video? Email it to Bobfixesitup@yahoo.com
________________________________________________
Keystone Motor Club (Founded 2012)... Free car show Every 3rd Saturday, newsletter is
https://www.tamparacing.com/forums/e...-car-club.html
Keystone picture gallery is here:
https://carstoshow.com/eventdetails.aspx?eventid=93202
Veterans and Friends on First Saturday...Some pictures....
https://carstoshow.com/registerevent...eventid=102331
Port Richey Rod Run at Coast Buick GMC
https://carstoshow.com/registerevent.aspx?eventid=99114
50's Diner US19.... A Florida Attraction.
1730 US-19, Holiday Fl 34691 click: https://www.tamparacing.com/forums/t...acing.html CHRA sanctioned cruise-in.
Cruise-In; Free; Every Saturday 5-8PM plus 10% off the whole menu to cruisers
50's Diner pictures are here: https://carstoshow.com/eventdetails.aspx?eventid=93194
All Cars Every 2nd Saturday Free Breakfast: Since 2015 and more. click: https://www.tamparacing.com/forums/e...ast-tampa.html
Tampa Racing.com covers the Tampa car scene and supports many fund raisers, worthy causes and events that enrich our community. We hope you enjoy them all.
What do I do? ---- on-site *Aftermarket* spring/suspension installations --- on-site impact wrenching---street lowering with your own stock springs...........True Bi-xenon HID projector headlight conversions........ Much more at Bob's Garage!
https://www.tamparacing.com/forums/b...ontact-us.html
https://www.tamparacing.com/forums/b...e-senor-honda/
Registered User
Joined: Dec 2005
Posts: 134
Likes: 0
-d15 or d16 Cable Tranny (obvious) change the throw-out bearing while its out
-Shift linkage
-Clutch Cable ( might have to drill a whole in firewall)
-if its a Dual Point u need a Manual PM5 ECU ..PM6 for Multi Point
-Rear Complete Mount 'bracket and mount' M/T
-Left Complete Mount ''^^^^^^^^^^^^^^
-Flywheel w/ M/T bolts
-Clutch w/ Pressure Plate and Pressure Plate Bolts
-Pedal Assembly (Dual Point gas pedal hooks up differently than Multi Point to throttle cable- easy to swap old gas pedal to new pedal assembly)
-Wiring is very easy!! BASIC!!
-I resused A/T Starter and Axles.. im not sure about how axles work with the wagovan though!!
AND PATIENCE!! lol
My conversion ran me about $250 for all parts!... If you need any pointers shared_pm me!! Good Luck!!
-Shift linkage
-Clutch Cable ( might have to drill a whole in firewall)
-if its a Dual Point u need a Manual PM5 ECU ..PM6 for Multi Point
-Rear Complete Mount 'bracket and mount' M/T
-Left Complete Mount ''^^^^^^^^^^^^^^
-Flywheel w/ M/T bolts
-Clutch w/ Pressure Plate and Pressure Plate Bolts
-Pedal Assembly (Dual Point gas pedal hooks up differently than Multi Point to throttle cable- easy to swap old gas pedal to new pedal assembly)
-Wiring is very easy!! BASIC!!
-I resused A/T Starter and Axles.. im not sure about how axles work with the wagovan though!!
AND PATIENCE!! lol
My conversion ran me about $250 for all parts!... If you need any pointers shared_pm me!! Good Luck!!
__________________
Red EJ2 w/D15B vtec (95 Coupe)- DD/Project
Silver GD3 (08 Fit Sport)- SOLD
Red EJ8 (97 ex Coupe)- SOLD
Blue ED6 (89 dx Hatch)- SOLD
SOHCVTEC
Silver GD3 (08 Fit Sport)- SOLD
Red EJ8 (97 ex Coupe)- SOLD
Blue ED6 (89 dx Hatch)- SOLD
SOHCVTEC
Last edited by xxdanib21xx; May 23, 2010 at 11:04 AM.
I'm cooler than you
Joined: Nov 2009
Posts: 395
Likes: 0
-d15 or d16 Cable Tranny (obvious) change the throw-out bearing while its out
-Shift linkage
-Clutch Cable ( might have to drill a whole in firewall)
-if its a Dual Point u need a Manual PM5 ECU ..PM6 for Multi Point
-Rear Complete Mount 'bracket and mount' M/T
-Left Complete Mount ''^^^^^^^^^^^^^^
-Flywheel w/ M/T bolts
-Clutch w/ Pressure Plate and Pressure Plate Bolts
-Pedal Assembly (Dual Point gas pedal hooks up differently than Multi Point to throttle cable- easy to swap old gas pedal to new pedal assembly)
-Wiring is very easy!! BASIC!!
-I resused A/T Starter and Axles.. im not sure about how axles work with the wagovan though!!
-Shift linkage
-Clutch Cable ( might have to drill a whole in firewall)
-if its a Dual Point u need a Manual PM5 ECU ..PM6 for Multi Point
-Rear Complete Mount 'bracket and mount' M/T
-Left Complete Mount ''^^^^^^^^^^^^^^
-Flywheel w/ M/T bolts
-Clutch w/ Pressure Plate and Pressure Plate Bolts
-Pedal Assembly (Dual Point gas pedal hooks up differently than Multi Point to throttle cable- easy to swap old gas pedal to new pedal assembly)
-Wiring is very easy!! BASIC!!
-I resused A/T Starter and Axles.. im not sure about how axles work with the wagovan though!!
__________________
It's alright if you don't agree with me. I can't force you to be right.
Honda-Tech > TampaRacing
TR "Old Skool EF" Member #666
All motor 1.8L: 201/140 More coming soon
I mount an balance 24" tires for $40 each.
It's alright if you don't agree with me. I can't force you to be right.
Honda-Tech > TampaRacing
TR "Old Skool EF" Member #666
All motor 1.8L: 201/140 More coming soon
I mount an balance 24" tires for $40 each.
