When give gas, rpms drop...
damn man this is like problem number 1000? do your self a favor and burn that car. Unless is a eg hatch sell me the shell then throw the motor in a lake lol.
__________________

-Induction Performance
ALPHA Tuned.
-ROQUE MACHINE SHOP
For ALL your fabrication needs.

-Induction Performance
-ROQUE MACHINE SHOP
try and reset your timing, you my think its good but make sure your top dead center lines up... and then take your dizzy apart... just look for stuff, tighten some bolts and screws and retard it ALL THE WAY! thats what i had to do... mine was doing the SAME thing, like i said in your old thread... i reset my timing and retarded my dizzy and now it runs perfect!
__________________
Its difficult but not impossible. Seen this happen before. The car obviously won't run.
__________________

-Induction Performance
ALPHA Tuned.
-ROQUE MACHINE SHOP
For ALL your fabrication needs.

-Induction Performance
-ROQUE MACHINE SHOP
Hmm.. I have seen it.. Strange I know..
i would deff try the next way to top dead it by pulling out the spark plug in #1 and stick a long screwdriver or the oil dip stick in the spark plug hole into the motor.. then turn it slowly with a wrench on the crank bolt till it hits top dead.. you will see it go up and level out. then check the mark on the crank pully..
i would deff try the next way to top dead it by pulling out the spark plug in #1 and stick a long screwdriver or the oil dip stick in the spark plug hole into the motor.. then turn it slowly with a wrench on the crank bolt till it hits top dead.. you will see it go up and level out. then check the mark on the crank pully..
__________________
Hmm.. I have seen it.. Strange I know..
i would deff try the next way to top dead it by pulling out the spark plug in #1 and stick a long screwdriver or the oil dip stick in the spark plug hole into the motor.. then turn it slowly with a wrench on the crank bolt till it hits top dead.. you will see it go up and level out. then check the mark on the crank pully..
i would deff try the next way to top dead it by pulling out the spark plug in #1 and stick a long screwdriver or the oil dip stick in the spark plug hole into the motor.. then turn it slowly with a wrench on the crank bolt till it hits top dead.. you will see it go up and level out. then check the mark on the crank pully..
thats exactly how i do it. ... i mean car ran perfect before guyz then started out of no where to mis, then stopped then started even more and now its all the time..... i did nothing different.
__________________

TR 5th Gen Civic CREW Member # 04

TR 5th Gen Civic CREW Member # 04


