Honda/Acura Tech Honda tech discussion.

Steering wheel off center

Thread Tools
 
Old May 23, 2002 | 05:29 PM
  #2 (permalink)  
Tits McGee's Avatar
is cooler than you
 
Joined: May 2001
Posts: 9,124
Likes: 0
Default

you mean its turned a little to one side or the other???

you need to go get an alignment. anytime to do anything with the suspension of the car you should get an alignment.
__________________






Reply
Old May 29, 2002 | 05:36 AM
  #4 (permalink)  
KJ's Avatar
KJ
bored at work
 
Joined: Oct 2000
Posts: 4,263
Likes: 0
Default

if the car is aligned and the wheel is still not straight look down on the floor board were steering shaft exits the cabin. Remove the pincher bolt then follow the shaft up towards the steering wheel till you reach a bracket with two bolts remove those. Follow the shaft up higher and remove the final two bolts to get to these you might have to remove the fuse cover or some of the lower steering covering. The steering wheel shaft assembly will then pull out. The shaft is splined at the bottom so just pull it out and turn it till it is straight and put everything back together.
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.

Gracie Barra Clearwater Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Reply




All times are GMT -8. The time now is 06:32 PM.