Clutch Losing Pressure. I dont know what to do!
Thread Starter
Registered User
Joined: May 2009
Posts: 177
Likes: 0
Clutch Losing Pressure. I dont know what to do!
I have a 00' Civic Si hydro tranny. Well during June, i changed my Clutch master cylinder because i was losing pressure and there was a little leak in the area where the pin goes into the master cylinder. And now its having the same problem with a new clutch master cylinder. And also i keep hearing a creaking noise inside where my pedal is at, and inside the engine bay by the tranny. i really dont know what to do lol, im just scared that my pedal has no pressure when i press down on it crossing an intersection. 
if anyone can help please PM me. Thanks in advance!
In the making...
Joined: Jun 2006
Posts: 1,057
Likes: 0
haha this must be a common problem me and my girls cars are doing the same thing. GL finding out what it is.
Registered User
Joined: Oct 2006
Posts: 466
Likes: 0
Either check ur bleed again, or pull the rubber boot back on the clutch slave cylinder bolted to the tranny in the front if its at all wet in there that would be ur problem , they go for like 15 bucks at advance brand new
No really,....it is
Joined: May 2006
Posts: 2,984
Likes: 0
or the slave cylinder that's pushing the throw out bearing...
check your slave for leaks. pull the rubber cover off and see if its leaking fluid from there. your new master might be putting out a lot more pressure and your old slave seals couldn't handle it....
