Honda/Acura Tech Honda tech discussion.

Teg Trans Problem!!!

Thread Tools
 
Old 04-26-2009, 03:20 PM
  #1 (permalink)  
Registered User
Thread Starter
 
DaNZO35's Avatar
 
Join Date: Feb 2009
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Default Teg Trans Problem!!!

hey guys...I need a second opinion on these issues my car is having....first off my trans and clutch never had any major issues...besides a squeaky throwout bearing and occasionally it would give me a little trouble going into 1st....but as of last night I lost all my "up" gears.....1st 3rd and 5th are gone.....I havent checked the fluid just yet but I will be looking into that tomorrow and will be looking at the linkage....Im almost certain its something fluid or linkage related....possibly clutch related but not sure yet...I dont think the tranny grenaded only because the problem came so suddenly.....any feedback would be appreciated
Old 04-26-2009, 03:39 PM
  #2 (permalink)  
engine building &best
 
rangcrx's Avatar
 
Join Date: May 2003
Posts: 11,971
Likes: 0
Received 0 Likes on 0 Posts
Default

how olds the clutch?if the clutch set is to worn then the problems you stated are able..have someone under the hood while you push in the clutch to see if the slave is pushing the lever out all the way....does the pedal feel softer?
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?

175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!

how many speed holes do i need in my bumper,b4 i can run 15's?
Old 04-26-2009, 04:08 PM
  #3 (permalink)  
Registered User
Thread Starter
 
DaNZO35's Avatar
 
Join Date: Feb 2009
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Default

theres probably 20k on the clutch......pedal doesnt seem to have changed....so im assuming line pressure is good and i know theres no air in the lines...i bled the lines when the clutch master was replaced not too long ago....the only thing thats making me think it could be the clutch is the throwout bearing problem and its an ebay clutch according to the previous owner
Old 04-26-2009, 06:53 PM
  #4 (permalink)  
Registered User
Thread Starter
 
DaNZO35's Avatar
 
Join Date: Feb 2009
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Default

bump...any1 else???
Old 04-26-2009, 07:19 PM
  #5 (permalink)  
Registered User
 
lzylst's Avatar
 
Join Date: Jul 2005
Posts: 5,766
Likes: 0
Received 0 Likes on 0 Posts
Default

Forward gears huh....... did the shifter bend? When you shift into those gears the rod will travel towards the rear of the car. It may not be engaging all the way.
__________________
Vance @ 863-604-2139 for any questions
Old 04-27-2009, 08:45 PM
  #6 (permalink)  
Registered User
 
civicized's Avatar
 
Join Date: Jul 2005
Posts: 982
Likes: 0
Received 0 Likes on 0 Posts
Default

You did not tell us what you meant by "lost" up gears. Do you mean while driving and using the clutch, or are you saying you can't even get the gears while the car is parked with the engine turned off?
Old 04-28-2009, 02:33 AM
  #7 (permalink)  
Cold Ass Honky
 
SuburbanNoize's Avatar
 
Join Date: Aug 2007
Posts: 5,067
Likes: 0
Received 0 Likes on 0 Posts
Default

Call The number in my sig, I went to him when I was having clutch problems, hes great.
__________________


TR DC CREW MEMBER #4


StricklyMT.com
Performance Specialist
727-510-6301




All times are GMT -8. The time now is 09:13 AM.