Tapping in the engine!!!
well i just did a rebuild on my stock ls bottom end, new main and rod bearings new, oil pump, water pump, etc....
well i started my car up and drove it for 100 miles and it started to make a tapping sound like it was a rod nock sound but it didnt come from the bottom end, it mostly sounds like its coming from the head, i checked the oil for metal shavings didnt find any so idk what else to do, i just took out my cams but didnt find anything interesting of where the sound would come from |
Vtec head? Possible valve adjustment.
|
timeing right? could be knocking valves into the pistons lol
|
maybe dirty lifters????
|
no vtec head stock ls head with new valve train, about 7k miles on it, i did the valve adjustment but still knocking sound
|
i thought i had the timming right maybe i was off idk could there be something else
|
how can u tell if it is rod knock? or not
|
Originally Posted by CrXSibeast
(Post 6520470)
how can u tell if it is rod knock? or not
|
ok ill try that gotta put the cams back on and redo the timming so lets see if that helps
|
did you check the specs on the bearings?if it was not making it when you first started then sounds like there was to much gap and is now starting to wear down,why did the bottom need rebuilding?was the crank checked?is it a tapping or more like a light thuddish rattle sound
|
All times are GMT -8. The time now is 08:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands