What transmission is it for? Exedy can be purchased through worldpac, through Carquest. Call them back and ask for the clutch from worldpac or just pm me the info. I'll get it for my price, which for my 91 ls transmission is $207 with tax and it's an exedy oem replacement. Exedy makes clutches for Honda.

They're cheaper for hydro transmissions.

 

Carquest also has rebuilt clutch kits at a fraction of the cost with bearings from Dana.

 

Sent you a PM, let me know how much either of them cost and how I can get them, the CQ rep I got on the phone for the store here in Gville on 8th seemed pretty..clueless.

Thanks!

 

You will need a flywheel if youre not having yours resurfaced.

 

Could be bad pilot bearing or throwout bearing...

 

you can get the exedy clutch kits with a brand new fidanza flywheel for about $260 and the clutch kit alone is around $100 check on ebay thats where i found those.

 

No, you don't want a Fidanza flywheel, believe me. They're too light for normal driving; too small of a rotational mass, not enough stored energy for bellow 2000 rpm from start launches. Those light-weight flywheels are for launches on a drag strip, say about 4000 rpms and such. You don't want to have to rev up your car every time to 4000 just to start from a light, believe me. IF and when I get my 12.5 lb. flywheel in my DA, I can let you drive it to see how it is. 12.5 lbs. is the least I would go. I am even thinking about stock.

 

Thanks for all the great input guys, I'm meeting with Wolfenr Saturday to knock out the sound and figure out exactly what it is, hopefully it's the clutch and I can get this baby taken care of.

 

If u push the clutch pedal 2 the floor and the noise goes away its your throwout bearing I can almost guarentee it

 

I don't even need to push it to the floor, I just tap it lightly in with my foot and the noise goes away.