I'm New to TR, I just traded my lexus gs300 for a acura Integra it has a LS block with a GSR head everything is good but my Damn VTEC isn't hitting what could I do? Maybe a wire or something please help me out give me some suggestions to what I can do. And also I wanna B16 tranny or GSR tranny because who ever had the car before put a DA integra LS tranny which I don't know How they did it! But they did!

I also Wanna trade 2 fornt RSX black leather seats, for 2 front black leather GSR seats. Lemme know if your interested.

 

check engine light on? if it is, that is more than likely your problem.
provide more information on the motor condition and any problems.

G/L

 

with hondas there is no vtec when the check engine light is on?

 

depending on the code, Vtec might not engage.

 

LS tranny FTL. Check engine light on?

 

you can put any b series tranny to b series motor so DA tranny on ur car its not anything weird, longer gears.

 

Get your CEL straightened out first.

 

Turn the key all the way over but do not start the car and you should see your CEL light pop on. If it does not the bulb is burnt out or has been removed. Take the guage cluster apart and replace the bulb then go to Honda-Tech.com: Honda Civic/Del Sol (1992 - 2000): THE NEW CEL THREAD (HOW-TO & CODES) to see what is giving you problems.

 

GS300 for a no-vtec teg... just saying a Very bad trade?.. but for your problems, you can explain it better.. just no vtec can be anything..

 

surprised no one asked this yet....

what ecu is in there? pull the carpet back from the passenger side kick panel and post up the code on the sticker. also are there wires going to the vtec solinoid and pressure switch? (look for the green thing on the head near the dizzy.)