im trying to get my injectors a fuel rail back on my gsr my problem is i cant get the injectors to go into the seals on the manifold and tips or sug would be nice thatnk you

 

they push right in.

 

yea thats what i thought but its not happening

 

oand i have rc 550 injectors and when i push one in it will go all the way in then just pops out it really weird it one of the last things i need to do to get my car running so pleaase help

 

lube it with oil.

 

i did that lol

 

hmmmm, place the injectors on the fuel rail first? then maybe attach the fuel rail and injectors onto the manifold with a bolt in hand? do you have anyone there to help you? maybe buy some new/bigger injector seals if the rc injector bases are larger?

 

they are the same seals and injectors that were on the motor when i took them off i have had four people try and no one has been able to do it maybe ill buy new seals and try that

 

Sometimes one side of the seal will roll up due to friction, then unroll like a wound rubber band, backing it out.
Don't push them in, screw them in or twist them in back and forth. If it still does it, get new o-rings and apply WD-40 or silicon lube on them.

 

thanks ill try that