Ok,I need a few questions answered.

1.What year Vtec head is better to use?

2.The vtec head TIMING Belt is the belt I have to use,correct?

3.I know I need to use the Vtec ECU,but when wiring the VTEC,is there 2 wires or 3?....Im tring to find that website that shows the diagrams on how to wire vtec,since im not to sure on how many wires I have to run,but I cant seem to find it...

Thanks for the help.
-Wildman-

 

I'll try to help you out here a bit.

1. The best Vtec head for you to use would probably be a 92-95 Prelude H22 head. You'll have to use the H22 head gasket as well I believe.

2. The H22 or whatever Vtec head you decide should be used to compensate for the new head and whatever size differences there may be.

3. When wiring the Vtec into the ECU there are 2 wires that run to the ecu itself. See Below:










Seeing how you drive a cb7 accord as do I, a very good website for you to visit would be CB7tuner.com - 4th Generation Accord Online Community

Hope this helps.