Adding ITR or GSR parts to LS engine

Reply Subscribe

Thread Tools

Apr 27, 2001 | 12:37 PM

#1 (permalink)

Chismoe

Thread Starter

Craving Boost

Joined: Apr 2001

Posts: 66

Likes: 0

Ok Im wondering if this could be done. A buddy of mine has an Integ LS (2000) is it possible to add a Type R (or GSR) head to the engine? Also to further build up could we add ITR Valve springs or any other internals to build up the engine??

Ive heard the low-end of the LS and the high-end of a GSR combo is how to get the best power out of that engine....hoping you guys could help! Thanks

Apr 27, 2001 | 12:51 PM

#2 (permalink)

hybridEG

Guest

Posts: n/a

yesit is called ls/vtec ou need to modify a few things.
1.you need to tap a oil line to the block from the head
2.bore the dowle pins
3.get a gsr timing belt
4.get a v-tec ecu
5.lots of gaskets
6.b-series water and oil pump
7.arp rod bolts or endyn rods(arp bolts included)
8.if no rods shot peined rods i would not do that the rods were not made to rev that high. 9.i might of missed something so dont penalize

Apr 27, 2001 | 03:13 PM

#3 (permalink)

John

Guest

Posts: n/a

70 d0 17 |21gh7 4|\|d m4k3 17 |23l14bl3 b4l4|\|c3 7h3 b0770m 3|\|d 4|\|d 4dd 4 537 0f V73C p1570|\|5 70 7h3 l157. 07h3|2\^/153 y0u m1gh7 |2u|\| 1|\|70 v4lv3 cl34|24|\|c3 p|20bl3m5. 1 |23c0mm3|\|d 317h3|2 1|\|73g|24 7yp3 |2 p1570|\|5 0|2 C1v1c 51 p1570|\|5.