hey guys i have a 91 hatch with an LS swap, and i was wondering what i have to do to put the A/C on it? nothing in the engine bay is there, but everything in the car including heater core is intact. what do i need to get dont just say compressor or lines. i know everything i need, just dont know wich specific ones will work in this case... the LS is a B18B1 if that matters....


thanx in advance, and everyone with helpful responses will be repped.

 

Umm I believe you can get an a/c comp. bracket from hasport to run the stock d series compressor that way you can use all of the stock a/c lines.

 

I checked hasport and didn't see anything about a bracket for a/c lines.
Good luck man.

 

i have a a/c fan if you need one.10$.

 

Hasport Billet Mounts


there at the bottom...custom a/c bracket to run your stock a/c system.


So yeah, just aquire all of the stock a/c components for her and your set. PM CARNAG3 with any questions. He's running a full a/c system with a b series swap.

 

i would get the 90-93 integra bracket.you will need a 90--91 integra ac compressor UNLESS you use the 92+ civic connections then you can use a 92+LS comprssor everything else you will need from the crx/civic 89-91 meaning lines relay sensor,and condser

 

yes but arent the lines different where they connect at the compressor from a SOHC EF to a integra?

 

thanx guys, youll receive rep as it will allow me to give it out.

 

^you can use all of the stock d series parts....i.e. lines, condensor, compressor and then you just go buy the bracket from Hasport. The bracket is 200 bones...ouch thats kinda steep....ah well gotta pay to play!

 

$200 isnt that bad when you consider how much you wish you had it in the summer months.....lol