My timing belt got loose for some reason, somebody knows about a tool to get that bitch off!!. Just in case I have no air compressor, any HELP will be appreciated. THANKS.....................

 

its going to be hard to break the bolt off if you dont have an air gun... but i did it without one, with a 2ft. breaker bar and another 1ft. extention...and my fat brother..lol... G/L though.

 

yeah, its gonna be a bitch to get off man. if you need someone to help you break it loose im a pretty big guy

 

OK, BUT HOW DID YOU HOLD THE CRANKSHAFT FROM TURNING??
THANKS........

 

LOL, THANKS.................

 

Take a big ass screw driver and plug it in the fly wheel. Theres a cover that blocks the bottom of the tranny...put a bigass screw driver in there and then gitcha a big breaker bar....you might have to drop you timming side mount to get a better angle at it....may sure your turning the socket the righ way....I'm positive that this will get our crank pulley off!

 

If it can make it out to Brooksville I'd be more than happy to do it for ya!

 

If the only problem is a loose belt, just tighten it. You don't need to take anything off unless parts have to be replaced.

 

^^^You have a point, but I was thinking that the tensioner went bad and the belt got loose. I just want to make sure everything is ok.

 

Thanks, let you know.