400HP D16Z6 powered Real Time 4WD EF hatch
Taken from: Honda-Tech.com: Forced Induction: Epic Tuning's 400HP D16Z6 powered Real Time 4WD EF hatch.
Originally Posted by EpicTuning
As some of you remember we had a '91 EF hatch with a stock Z6 engine making 375whp @ 24psi. At this power level it ran 11.41 @121MPH. Since then we had turned it up some more. It made 390WHP with a slipping clutch @26psi. We changed the clutch and ran it at the track @ 28-30psi. The car ran 11.3@127mph. We couldn't run anymore because the car had no roll cage. Instead of turning it into a drag car we and the owner decided to go in a different direction. We wanted to make it all wheel drive, work through the problems and have a reliable 4WD civic for the street. We converted the car to Real Time 4WD from a '89 Civic Wagovan. We used the transmission, axles, driveshaft, viscous coupling, rear differential and subframe. The clutch is a ACT 4 pad disc and Heavy Duty pressure plate. So far at 24psi the drivetrain is holding up great. We have a couple hundred miles and 40+ tire chirping launches without a problem. We will keep putting it through its paces and see what, if anything, breaks. We will have video up shorty along with new all wheel dyno numbers.






This is what a 400 HP stock SOHC bottom end looks like :o

Oil pan clearanced for transfer case.

Trans mount needed to be raised 1"

Viscous coupler mounted


Rear diff mount




New manifold. Shorter runners, undivided collector, front facing inlet.


Cable shifter mounted.






This is what a 400 HP stock SOHC bottom end looks like :o

Oil pan clearanced for transfer case.

Trans mount needed to be raised 1"

Viscous coupler mounted


Rear diff mount




New manifold. Shorter runners, undivided collector, front facing inlet.


Cable shifter mounted.
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
wow, thats good stuff. i think that is the most hp i've seen one of these awd converted ef's run without breaking.
__________________
http://www.inductionperformance.com/

R.I.P
Kevin "Slo_Si" Gonzalez
6/21/86-9/13/06
Pablo Garcia
9/28/85-9/05/07
You will be missed and remembered forever!!!!
http://www.inductionperformance.com/

R.I.P
Kevin "Slo_Si" Gonzalez
6/21/86-9/13/06
Pablo Garcia
9/28/85-9/05/07
You will be missed and remembered forever!!!!



now theres sumthin to aim for

