Honda/Acura Tech Honda tech discussion.

>>>Need a DIY D15B7 Timing Belt/Water Pump Install guide<<<

Thread Tools
 
Old Aug 21, 2007 | 05:56 PM
  #1 (permalink)  
sirt8669's Avatar
Thread Starter
私は昼食のためのあなたのお母さんを持っ ていた
 
Joined: Aug 2005
Posts: 5,431
Likes: 0
Default >>>Need a DIY D15B7 Timing Belt/Water Pump Install guide<<<

Just as the title says. Changing all the belts but really need a guide for the timing and water pump.

Let me know!!

Thanks in advance,
Tony
Reply
Old Aug 21, 2007 | 06:37 PM
  #2 (permalink)  
BIGCOLT45's Avatar
Registered User
 
Joined: Mar 2007
Posts: 17
Likes: 0
Default

dude just follow the timing marks and buy a chilton
Reply
Old Aug 21, 2007 | 07:12 PM
  #3 (permalink)  
sirt8669's Avatar
Thread Starter
私は昼食のためのあなたのお母さんを持っ ていた
 
Joined: Aug 2005
Posts: 5,431
Likes: 0
Default

That will be my last resort but I see DIY guides for most of the other motors but not mine, atleast so far in my searches.
Reply
Old Aug 21, 2007 | 09:03 PM
  #4 (permalink)  
mug's Avatar
mug
Hey Mr Toilet Im The Shit
 
Joined: Feb 2004
Posts: 1,312
Likes: 0
Default

Honda-Tech.com: Honda Civic/Del Sol (1992 - 2000): [FAQ] Complete DIY How To: Timing Belt/Water Pump Change on a D16Z6 - lots of pics!

Their you go same process dont matter what motor.

Also alot easier if you use a impact on the crank pully but thats up to you.
__________________
Reply
Old Aug 21, 2007 | 09:03 PM
  #5 (permalink)  
rangcrx's Avatar
engine building &amp;amp;amp;best
 
Joined: May 2003
Posts: 11,971
Likes: 0
Default

its not to hard,but i would at least try to find someone to help you out with some steps,a book will tell you how to do it but timing is tricky!buyt just one step to help you undo the drain bolt on the front of the block its a big 19mm bolt to drain out the fluid so you dont have it comeing out the water pump when you remove
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?

175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!

how many speed holes do i need in my bumper,b4 i can run 15's?
Reply
Old Aug 21, 2007 | 09:34 PM
  #6 (permalink)  
sirt8669's Avatar
Thread Starter
私は昼食のためのあなたのお母さんを持っ ていた
 
Joined: Aug 2005
Posts: 5,431
Likes: 0
Default

Thanks for the info guys. So, your sure about it being the same, basically cause its a D series but having VTEC won't make a difference right?

Oh, also, my roommate is helping me with this and he has done one honda before but mostly works on American Muscle cars and such.
Reply




All times are GMT -8. The time now is 12:53 AM.