how to take out my alternator in my EF
Thread Starter
hanglike sleeve of wizard
Joined: Mar 2003
Posts: 2,252
Likes: 0
how to take out my alternator in my EF
i have a b16 swap in my EF. i have the alternator off the bracket. i tried taking off the bottom alt bracket and taking the alt out towards the wheel well. i have also taken off my oil filter trying to take it out thu the bottom. do i have to lower or raise my engine or something? im stuck!!!! please HELP!!!
__________________
image removed from your sig...see forum rules
image removed from your sig...see forum rules
crx hatch sedan
Joined: May 2005
Posts: 3,197
Likes: 0
drop the lower cotrol arm where it meets the chasis and might have to disconect the sway bar. might have to take the axle out too.
__________________
Hardtop s2000........ragtop civic wagon.......sounds good to me 
Last edited by flatrex; Jul 30, 2007 at 03:14 PM.
Thread Starter
hanglike sleeve of wizard
Joined: Mar 2003
Posts: 2,252
Likes: 0
i was doing some research...... i found on honda-tech that some guys pull the alt up thru the throttle body side. is there any truth to this?
__________________
image removed from your sig...see forum rules
image removed from your sig...see forum rules
Thread Starter
hanglike sleeve of wizard
Joined: Mar 2003
Posts: 2,252
Likes: 0
kind of confused by what u just typed. can you or someone else please reiterate what he just said to make me understand a lil bit better.... thanks
__________________
image removed from your sig...see forum rules
image removed from your sig...see forum rules
i like the blue ones
Joined: Jul 2002
Posts: 380
Likes: 0
__________________
Shut yo ass up nugguh..
ReginaVagina
Shut yo ass up nugguh..
ReginaVagina
Thread Starter
hanglike sleeve of wizard
Joined: Mar 2003
Posts: 2,252
Likes: 0
well with the intake manifold i have (AEBS) it is not feasible. i tried and to no avail i had no luck with it. i've had enough of this shizzle just for an alt, im about to put some notches on the rear crossmember slide that fucker out and call it a day.
__________________
image removed from your sig...see forum rules
image removed from your sig...see forum rules
Last edited by seventhgear; Jul 30, 2007 at 06:14 PM.
Cool Runnings
Joined: Dec 2002
Posts: 4,394
Likes: 0
you can get it out from the bottom without removing anything, but it is time consuming for it requires a lot of wiggling and shit like that. just take out the axle. why notch your crossmember and possible weaken it.
__________________
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/
She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA
R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02
THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED
TR "OLD SKOOL EF MEMBER" #05
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/
She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA
R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02
THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED
TR "OLD SKOOL EF MEMBER" #05
engine building &amp;amp;best
Joined: May 2003
Posts: 11,971
Likes: 0
easiest way is undo the 2 12mm bolts holding on the master cyl pull it forward and BAMMM pull it right up you will not harm anything i do it amillion times when working on thos cars
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
