machining cost for a Ls crank and rods!
Thread Starter
Dick is Huge!
Joined: Jul 2004
Posts: 4,015
Likes: 0
machining cost for a Ls crank and rods!
how much do you think itd cost to shotpeen, balance and machine a crank..
and whatever neccesary machining to do to the rods to handle the RPMS?
lmk
and whatever neccesary machining to do to the rods to handle the RPMS?
lmk
__________________
Totalled his shit!@
Totalled his shit!@
bored at work
Joined: Oct 2000
Posts: 4,263
Likes: 0
The only thing you'd want to do to the crank is balance and micropolish.
If you are using stock rods the thing to do is get arp rod bolts and have the big ends resized.
If you are using stock rods the thing to do is get arp rod bolts and have the big ends resized.
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richeypm me if you are interested in trying a free class at any of the gyms.
Registered User
Joined: Apr 2007
Posts: 23
Likes: 0
Do not machine that crank!... micropolish and that is it. ARP's are a must! Hone that block real good. Most of all...over anything else... oil pressure!! Watch that gauge... look for signs during break in. You should be looking at apporx 140 or polish and pressed rods/pistons. If you need a 18B JDM contact 50trim he owns Gear Racing. He has a few now.
