lowering civic with 17s
lowering civic with 17s
how would you do this would it rub when i lower it can i go pretty low or just a little it has low profile tires and are adjustable coilovers any good
__________________
Your running 17" wheels, If you tires are 205/40/17" or more narrow........You should be able to get a full 2.75" drop before you start rubbing.
If you have a camber kit in the back, Then you'll maybe only get 2.25 before the fender starts cutting into your tire when there are people or other types of heavy weight in the back of the car.
It's pretty much trial and error.
Drop the car as low as you want it, Test drive it, If something scrapes....Raise it back up 1/2"....Etc........
G/L
If you have a camber kit in the back, Then you'll maybe only get 2.25 before the fender starts cutting into your tire when there are people or other types of heavy weight in the back of the car.
It's pretty much trial and error.
Drop the car as low as you want it, Test drive it, If something scrapes....Raise it back up 1/2"....Etc........
G/L
a friend of mine had 17's on and he put on some s-techs (tein) the car looked real nice on them try dat
__________________
I © my Honda
i need
96-98 rear bumper (black)
96-98 fenders & hood (black)
rear filler panels (under tailights)
glove compartment lid/cover ( dark grey)
driver side ac vent(upper dash one)
TR "F#UCK Thieves" crew Member #10
I © my Honda
i need
96-98 rear bumper (black)
96-98 fenders & hood (black)
rear filler panels (under tailights)
glove compartment lid/cover ( dark grey)
driver side ac vent(upper dash one)
TR "F#UCK Thieves" crew Member #10
how do rolls work i have heard talk about it but what exactly is done?
__________________
We are what we repeatedly do. Excellence, therefore,
is not an act but a habit.
-Aristotle
We are what we repeatedly do. Excellence, therefore,
is not an act but a habit.
-Aristotle
take a pole of some sort put it between the fender and the tire, drive back and forth with the pole at a slop so it pushes the lip of the fender up. ghetto way of doing it but it works as its free rather than renting a fender roller.
__________________
http://www.cardomain.com/ride/2931273
'06 Mazdaspeed 6
L3-VDT
'02 S2000... Sold
F20c
'93 Civic dx... Sold
B18C1
'95 4dr. GSR... Sold
B18C1 Supercharged
'95 LS... Sold
http://www.cardomain.com/ride/2931273
'06 Mazdaspeed 6
L3-VDT
'02 S2000... Sold
F20c
'93 Civic dx... Sold
B18C1
'95 4dr. GSR... Sold
B18C1 Supercharged
'95 LS... Sold
Originally Posted by shamoo
I have no problems punching a 10 year old in the face if they dented my car with intent.
Sounds risky......?
thats ghetto as hell, i wouldnt do that.. surely it would messs up paint and stuff too. if its coil overs just go as low as you want, and work from there.. i have slammed my old civic on its nuts and never rubbed, although it wasnt on 17's.. just remember, the lower you go, the more fucked up your front end is going to get.