Will the Ignition Switch from a 87 accord Fit and work on my 90 crx.

Heres a pic of the 1 off the accord.

 

i doubt it.

 

i doubt it as well..as far as pluggin it up..however..i think maybe u could "rig" it up to work..just do research..to find differences..

 

go to lkq (clearwater) Im pretty sure they had an older crx....

 

The critical measurements are the diameter of the
"connecting-rod"-looking clamp and the distance
from the "connecting rod" end to the key hole.

The clamp can be shimmed to take up slack,
and if the flat surface of the key hole will line up
flush with the hole in the plastic piece surrounding
the steering wheel, then it will work.-Bob

Even more important will be whether the keys will be compatable
or will your door locks now need a different key,
or can you take the lock apart to use the same key.-Bob

 

Looking at the pic.........1.will the white plastic screw onto the back of what you have.....and 2.Are we helping you to steal a car by using another key? 3. What happened to the original key/lock? -Bob

[/quote]

 

at least someone asked, you never know on TR

 

Ignition shorted out and stoped working, Had to have it broke off and some wires jumped to get it to start again