leaking tranny
Thread Starter
Cool Runnings
Joined: Dec 2002
Posts: 4,394
Likes: 0
Honda Automotive Parts
actually, as i recall, and according to the honda parts catalog (items # 22 and 23) there are washers on both the fill and drain plugs.
the OEM bolt, with the washer, torqued to spec, should NOT LEAK at all. if you need to use gasket sealer, you either need a new washer, or your bolt is not tight enough.
actually, as i recall, and according to the honda parts catalog (items # 22 and 23) there are washers on both the fill and drain plugs.
the OEM bolt, with the washer, torqued to spec, should NOT LEAK at all. if you need to use gasket sealer, you either need a new washer, or your bolt is not tight enough.
thanks but from the pictures it looks like i undid #14 and #15. this is a b series tranny iof this will help any. i always tighten my stuff real good but will look into re-tightening and or if i need a new bolt thanks. what about the loctite and the honda bond idea?
__________________
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/
She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA
R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02
THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED
TR "OLD SKOOL EF MEMBER" #05
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/
She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA
R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02
THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED
TR "OLD SKOOL EF MEMBER" #05
UF Mech/Aero Eng
Joined: Apr 2003
Posts: 1,787
Likes: 0
its the same with whatever bolts you undid. honda doesnt seal anything other than the trans housing/clutch housing from the factory, so torque specs should do it.
but if puch comes to shove, then get some gasket maker/hondabond and put some on the threads. it should work just fine.
and just so you know, that pic is a B16 S4C trans.
but if puch comes to shove, then get some gasket maker/hondabond and put some on the threads. it should work just fine.
and just so you know, that pic is a B16 S4C trans.
__________________
University of Florida Gators - '06 NCAA Basketball & Football - '07 NCAA Basketball
University of Florida Gators - '06 NCAA Basketball & Football - '07 NCAA Basketball
Thread Starter
Cool Runnings
Joined: Dec 2002
Posts: 4,394
Likes: 0
will look into re-tightening it, but i will also look into getting some honda bond and put it on there one time so i will have some extra security. thanks for the ifo. it is much appreciated.
__________________
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/
She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA
R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02
THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED
TR "OLD SKOOL EF MEMBER" #05
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/
She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA
R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02
THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED
TR "OLD SKOOL EF MEMBER" #05
Thread Starter
Cool Runnings
Joined: Dec 2002
Posts: 4,394
Likes: 0
will check that out. did it with my hand but i really put a effort into tightening stuff. will get the specs hondabond and go from there.
__________________
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/
She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA
R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02
THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED
TR "OLD SKOOL EF MEMBER" #05
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/
She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA
R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02
THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED
TR "OLD SKOOL EF MEMBER" #05
