obd-0 b16 into a obd-1 integra
Thread Starter
im a ricer!!
Joined: Dec 2004
Posts: 1,746
Likes: 0
obd-0 b16 into a obd-1 integra
ok, heres the deal, i have a 92 integra gsr, with a semi built ls in it.(the original owner blew the b17). i found a great deal on a b16a but its obd-0. now my question is, what do i need to do for this to work? and if anyone is wondering, the ls is starting to knock and tick like crazy. any help would be appreciated. thanks
__________________
VTEC Out
Joined: Jul 2002
Posts: 10,022
Likes: 0
You need an OBD1 Distributor , OBD1 Injectors , Put the OBD1 IAT Sensor ont he B16 and to use your TB as it has an OBD1 Map sensor on the TB etc ...
__________________
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
Back in the Game
Joined: May 2005
Posts: 2,207
Likes: 0
He pretty much stated the info you needed. Good luck
__________________
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
Back in the Game
Joined: May 2005
Posts: 2,207
Likes: 0
Nope
__________________
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
Back in the Game
Joined: May 2005
Posts: 2,207
Likes: 0
Because the only other manifold that will fit a B16 is an ITR mani....An Ls or a GSR will not work. Even if you buy a Skunk2 mani it will only be for a B16/Itr. Basically the B16 and ITR have the same cast thats why.
__________________
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
Last edited by BG-33P_Hatch; Aug 14, 2006 at 07:15 PM.
Back in the Game
Joined: May 2005
Posts: 2,207
Likes: 0
Anytime
__________________
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
