Just put a B20 in my 90 teg. I ran it on the pr4 for a lil bit until my obd-1 dizzy arrived. It didnt throw any codes. Well i put my dizzy on and the p75 wit the jumper to convert to obd-1. Now all of a sudden my car throws code 9 and 20. So now sometimes i will have to pull over because my car will start stuttering and wont run rite cuz it starts to sound like im runnin off 3 cylinders. Ill let it sit for about 5 mins and then drive off fine. I know code 9 is the cyp sensor in the dizzy and it detects where the number 1 cylinder it at, but the code 20(electrical load detector) is what is bothering me... it never threw these wit my pr4.

Any advice would be great

thanks

danny

 

the dizzy you got is bad.

 

it came off a running car...

 

well it can only be two thing the dizzy or the harness since thats all you changed right. oh and the ecu so try another dizzy then if still bad try a good ecu if still bad check the harness.

 

ight

 

yea my wiring on the dizzy wasnt flawless.....

good lookin

thanks

 

hey no problem. hook it up with reps.