IF ANYONE HAS DONE A MIMI-ME AND LIVES NEAR OCALA, LET ME KNOW.

the kid who was helping me with it, bailed out after the first day and hastn called me IN 2 WEEKS.

i need to hook up dizzy, vtec, a few plugs im not sure about, a wire on the injector resistor box(not injectors, those are wired). THATS IT, PLEASE HELP IVE BEEN TO MANY FORUMS AND NO ONE HAS BEEN ABLE TO TELL ME WHAT TO DO. no one needs to physically come here but if anyone has a write up that actually is good, or if you know how, let me know.

 

i hear so much about mini-me's but it seems only 1 out of 100 people have actually done it and know exactly what to do. i guess ill have to wait for the 100th view. any input on this would be nice tho, thanx.

 

what head, what car since you said injector resistor box i assume a ef. ifso and you got a y8 head then the d16 a6 distributo will hook right up if you got a z6 head you will had to cut a leg off and modify the front one i think the top bolts right in. the vtec is easy if your already multi port.

 

z6 head, d15b2 bottom, si dizzy,

the car was dpfi, swapping it to mpfi is the part thats killin me.

edit: and its just wiring the dizzy that i need to know since i got 2 extra wires coming out of the ecu.

 

what pins are the two extra wires coming from? if you don't know how to count them start at the big one that's a, then start at the top right one that's a1 then a2 is below that one they go high(even)/low(odd). then the smaller clips are b and c.