hey everyone well i have a 94 civic hatch cx and i just got some power window motors, door panels and the wires from a 94 civic ex. The only thing i have is an alarm that automatically locks the doors . Someone told me that i need to have some type of power wire were electricity comes out of in order for this to work. I know how to put the motors and everything in the only thing is i have no idea how the wiring would be done. If anyone can tell me how to do this or even help me with this i would appreciate any type of help-thanks.

 

door actuators I think is what he is talking about.

 

IF you can get the underdash wiring harness/relay from an EX coupe, its not that hard.....
You dont need to take out your harness, but you need the connectors off the other harness. I did it in my DX, very simple if you get the underdash harness.

I wouldnt know where to begin if you wanted to make your own wiring, but your going to need some relays and find power/ground sources.

GL and if you get the harness let me know, I'll give you some step-by-step info.....

 

I did it about a month ago without a underdash harness. It wasnt that difficult. Search on Honda-tech and there is a diagram with colors and where they go. the worst thing about this swap is it is time consuming. there is alot of soldering that is invlolved and running wires and looming them and such. It took me about 6 hrs taking my time.