So i ordered some stage II DSS axels, 92-95 civic with a b series swap. And the driver side fit right in perfect, but the passenger side doesn't fit in correctly, wiggles in the socket, and extends out to far. The tranny is a y21, and motor is a ls/vtec. any input will be greatly appreciated.

 

is the axle seated all the way in the tranny? sometimes you really have to give them hell to get em to pop in. You can allways check it side by side with a stock axle axle...

 

+1 on that, make sure you really get it in there all the way

 

Side by side, the DSS is visually longer than the original. I'm wondering if a del sol vtec axle would fit in there? Anyone have one laying around so i could at least try to see if it would seat, then order the correct one?

 

i dont understand why it wouldnt fit unless they made a mistake.

how much longer is it?

 

just call or email dave at DSS he will gladly replace it with a new one, he will even give you a number to send it back with

 

 

I called DSS today, and he mentioned this "that's how our design is" meaning longer axle. I don't know. I'm going to try and fuck with it some more, and if not, ill send it back.

 

i had that problem before..check the old axle on the end theres that little clip sometimes they fall off inside the trans ....and if thats not it...hit the end witha ruber mallot till you hear it click or feal it...if that dosent work its the wrong axle..