I went today to let the car run for a few and put some more gas in it.. well i popped the hood as i let it idle and notices a little bit of white smoke coming from the back side of the valve cover, its the back right. it seems to be coming out from between the valve cover and head and blowing down, but it may be from the head itself.. here is a pic of where... you cant see the smoke though, stupid phone..

 

its probably coming from the breather, and thats blow by which is not uncommon (within reason) for built motors with larger clearances but if you have a stock motor that usually indicates that your rings and/or ringlands are not in good shape

 

its not stock, srp pistons, eagle rods, ferrea valvtrain ect. i would not be suprised if its blow by, i plan to get the endyne breather set up soon. thanks

 

anyone else have opinions on what it could be? im not to sure its comming from the breather thing there.

 

Tim,

Get a leak down & compression test done. That motor has been through several owners before it was properly tuned.

Good Luck,
John Vega - Phearable.net

 

lovely

 

+1 for what john said.

 

who can do one??? and how much??

 

they sell compression testers are advanced autoparts. goodluck man.

 

its very easy to do a compression test.... call me if you need help Tim