94 accord front brakes & rotors... pisssin me off
Thread Starter
Registered User
Joined: Mar 2004
Posts: 3,523
Likes: 0
Originally Posted by Timothy
are there screws in it?? usually there are screws that are really tight, I forgot the tool you use, but basically you hit the end and it spins the screw driver. t
Professional Dumbass
Joined: Mar 2003
Posts: 2,016
Likes: 0
the plate is in the rotor?..if so, the rotor is a bitch to get off...you'll more or less need to take everything apart as if you where replacing an axle, behind the rotor it self, there are 4 bolts, in which you'll need to pound, and the screw them off.
taking off axle nut, cotter pin out of lower ball joint, seperating the join from the assembly, then when you flip around the whole assembly there are 4 bolts, like in somesort of star shape 10mm 12 points that you need to bust out, but before you do that youll have to go buy new bolts to replace those i believe 4- 10mmx1.25 and 60mm long bolts..after you get those 10mm off, you'll need to hammer at the back of the rotor to get it to come off, after that it should come off, then do all in reverse with using your new bolts but with tightening them as tight as you can...
taking off axle nut, cotter pin out of lower ball joint, seperating the join from the assembly, then when you flip around the whole assembly there are 4 bolts, like in somesort of star shape 10mm 12 points that you need to bust out, but before you do that youll have to go buy new bolts to replace those i believe 4- 10mmx1.25 and 60mm long bolts..after you get those 10mm off, you'll need to hammer at the back of the rotor to get it to come off, after that it should come off, then do all in reverse with using your new bolts but with tightening them as tight as you can...
__________________
Itz jus' fo deckarayshunz man jus' fo deckarayshunz
Itz jus' fo deckarayshunz man jus' fo deckarayshunz
Last edited by lowoctane; Nov 27, 2005 at 09:28 PM.
