clutch??
clutch??
when im romping on it, and shirf quick, from first to second, the rpms go to 4k, and then drop to 3,300 and then i feel it catch. then, i'll drop it into second from any gear, and if its over 3k, it goes up to 3,800 then drops to 3,400 before it catches. im 99.9% sure its my clutch. but i want to be 100%. any input would be greatly appreciated. and if you have any imput on clutches would be great also. oh yeah, i have an 88 crx si tranny.
thanks,
jeff
thanks,
jeff
__________________
Clutch is slipping, I would replace the clutch/ PressurePlate and throw out bearing .....and have the flywheel resurfaced.
Go to bay city clutch , you can get everything for like 200+ depending on what clutch you go with.
Go to bay city clutch , you can get everything for like 200+ depending on what clutch you go with.
__________________
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
where is that? i'd probably want to do this tomorrow. id want probably at least a stage 1 clutch kit. and maybe upgrade the fly wheel. could they install it there? or would i just buy it there?
__________________
Give Clutch City a call in Largo. I picked up a ACT HD clutch kit for my car and it cost $238.00 +tax.(included Clutch Disk, Pressure Plate, Throw-out bearing and the clutch tool.) Great people to deal with. He also resurfaced the FW for like $25.00. His number is (727) 559-0659.
The bearing your refering to is the pilot bearing. Also I have D series aluminum Fidanza flywheels coming in. PM me if your interested.
Kris
Kris
__________________
Chavez Motorsports
The reason CMS fabrication is closed!! Click me!
11.965 @ 114 Supercharged Teg...RIP
Chavez Motorsports
The reason CMS fabrication is closed!! Click me!
11.965 @ 114 Supercharged Teg...RIP
Originally Posted by USCordia
Give Clutch City a call in Largo. I picked up a ACT HD clutch kit for my car and it cost $238.00 +tax.(included Clutch Disk, Pressure Plate, Throw-out bearing and the clutch tool.) Great people to deal with. He also resurfaced the FW for like $25.00. His number is (727) 559-0659.
awsome people. id send everyone there.
definate clutch slipping and yes if your going to be replaceing always a good time for a bit of an upgrade.
-Jay
-Jay