VAFC Question
VAFC Question
Vafc Question
car is a 89 Civic Si with a Z6 swap still obd0!
i'am lost on where to hookup the in and output wires for vtec and pressure so thats four wires in total! help would be great! Thanks
car is a 89 Civic Si with a Z6 swap still obd0!
i'am lost on where to hookup the in and output wires for vtec and pressure so thats four wires in total! help would be great! Thanks
__________________
Do a Google search. I know there are a few sites with the pin out maps.
I have the APEXi VAFC as well with my B16A obd0.
I have the APEXi VAFC as well with my B16A obd0.
__________________
Florida CRX Meet 2011 http://www.facebook.com/pages/Florid...2354313?ref=ts
Florida CRX Meet 2011 http://www.facebook.com/pages/Florid...2354313?ref=ts
http://www.homemadeturbo.com/forum/i...?topic=14497.0
Apex-I AFC VTEC controller
for PM6 (88-91 civic/crx) or PG7 (88-89 1.6L integra) ecu application only
V-AFC VTEC controller -------> ECU PIN location
Red & Orange wire splice/connect to A15 (yellow/black)
Green wire RPM signal splice/connect to B15 (white1)
Pink wire VTEC signal output to VTEC solenoid (green/yellow)
Purple wire VTEC signal input not used on PM6 ecu
Blue wire VTM signal not used on PM6 ecu
Gray wire Throttle signal splice/connect to C7 (red/blue wire)
Yellow wire Pressure signal output cut/connect to C11 ECU side harness
Si/Hf = white1 , DX = orange
White wire Pressure signal input cut/connect to C11 ENGINE side harness
Si/Hf = white1 , DX = orange
Black wire Ground splice/connect to A16 (brown/black wire)Engine side harness
Brown wire Ground splice/connect to A16 (brown/black wire)has to be connected closer to the ECU
I love you too
Apex-I AFC VTEC controller
for PM6 (88-91 civic/crx) or PG7 (88-89 1.6L integra) ecu application only
V-AFC VTEC controller -------> ECU PIN location
Red & Orange wire splice/connect to A15 (yellow/black)
Green wire RPM signal splice/connect to B15 (white1)
Pink wire VTEC signal output to VTEC solenoid (green/yellow)
Purple wire VTEC signal input not used on PM6 ecu
Blue wire VTM signal not used on PM6 ecu
Gray wire Throttle signal splice/connect to C7 (red/blue wire)
Yellow wire Pressure signal output cut/connect to C11 ECU side harness
Si/Hf = white1 , DX = orange
White wire Pressure signal input cut/connect to C11 ENGINE side harness
Si/Hf = white1 , DX = orange
Black wire Ground splice/connect to A16 (brown/black wire)Engine side harness
Brown wire Ground splice/connect to A16 (brown/black wire)has to be connected closer to the ECU
I love you too
__________________
2002 Subaru WRX
1988 Honda Civic Hatch
2002 Subaru WRX
1988 Honda Civic Hatch