Everybody has them.
I want to hear about the troubles you had, stuff you forgot to do and how you rigged it to work. Stuff like that.


This thread should help a few people down the road with there own swap.

 

Once put a motor and fucked up air/water lines before.................lasted 6 minutes

Make sure you know the Vaacum Line Diagram for a motor before you decide to yank it out happened a lil while ago...just a bump in the road on the way a knowledgable H/A Tuner

 

is that why your car hasn't seen the road in 10 months?

 

Naw black-ass It hasnt seen the road because warped valve seals will own your ass sooner or later if you dont replace them

 

my fucking crx wont start, no fuel pressure , no spark. im stumped. gave me a error code 15 and 20.

who fucking knows whats wrong with my crx. can anyone helpme?

 

you aint check the code?

 

yeah i did, but i dont know how to diagnose that/ how to fix it. I posted a thread here in acura/honda tech but so far, none has replied/helped

here is the problem =
15) Ignition Output Signal - Missing or defective ignition output signal
20) Electronic Load Detector - Defective circuit or unplugged/ Defective sensor

someone please help! i need this car to start.
btw, the car doesnt have fuel pressure or spark. i was thinking maybe problem with the spark is error code 15 and the fuel problem could be fuel pump. the car hasnt been started for god knows how long. 3-4 years so maybe the gas tank needs to be takend down and cleaned. its a crx so i was wondering if i need to take down the tank to change the fuel pump?

please help

 

Some people just dont have the resources to "fix it properly" and I thought the word "rigged" would bring out some better stories.

 

I did my first rebuild a couple years ago in my crx. It started out when my radiator had a crack in it and a friend of mine had a spare. We installed it and went for a drive later in the afternoon. During that drive, my waterpump went out and my car overheated and I bent a couple valves. YEAH.... We towed it back to the house, ate some xanax and started the rebuild. You can only imagine what happened next. "Do you remember where we put that" "Do you remember where this bolt goes" and so on... Needless to say, when we were finished we had extra parts all over the place. I am glad to say she ran up until the the swap.

The XanaX Mechanics

******Attention******
Do not try this at home